ADSL Magnetics Lucent TM01342 Designed to comply with the requirements of UL1950 and EN60950 to provide a supplementary insulation barrier with a working voltage of 250V • Operating and storage temperature range: -40° to +85°C • Meets IEC 695, 2-2 flammability requirements • UL File Number E150991 • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Minimum interwinding breakdown voltage of 1500 Vrms • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • ELECTRICAL SPECIFICATIONS at 25°C Turns Ratio ±2% Inductance1 µH ±5% Leakage Inductance2 µH max Chip : Line Line Side Line Side Chip Side Line Side 1: 2 225 10 2.7 3.1 Part Number 0560-6600-N6 DCR Ω max Interwinding Capacitance3 pF max 50 Longitudinal Balance4 dB min Insertion Loss4 dB max Frequency Response4 dB max Harmonic Distortion4 dB max 30 kHz 1.1 MHz 300 kHz 30 kHz 1.1MHz 100 kHz 2 Vrms 55 1 0.5 -80 All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Leakage inductance measured at 100 kHz, 0.1 Vac 3. Interwinding capacitance measured at 1 kHz, 1 Vac 4. Measurements made with 100Ω source and 25Ω load impedance SCHEMATIC 0560-6600-N6 1 8 3 6 Chip Line 2 7 4 5 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 06.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Lucent TM01342 MECHANICAL 0560-6600-N6 0.440 (11.18) max 0.480 (12.19) max 0.460 (11.68) max 0.134 ±0.010 (3.40 ±0.25) 0.098 (2.50) 0.020 (0.51) Sq. typ 0.295 (7.50) Dimensions are in inches (millimeters). Standard dimension tolerance is ±0.005 (0.13) unless otherwise noted. ©2001 Bel Fuse Inc. Specifications subject to change without notice. 06.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2