T1/E1/J1 SMD Line Interface Hybrid for PMC Octal LIU APC82247s FEATURES • Suitable for all T1/E1/J1 applications • Compatible with PMC4318 3108 Octal LIU chip • Minimum Board Space requirements • Designed for multiple interface line cards • Surface Mount Footprint • In order to maintain the overvoltage/overcurrent capability of the module, the recommendations for the tracking between the Line and the Tip and Ring port of the module are as follows: Trace width = 0.025in 1oz Copper Trace separation between Tip and Ring 0.025 in minimum to the line part of the module • Longitudinal protection circuit designed to meet FCC part 68, Telcordia GR1089 for 1st level and 2nd level lighting and 1st level power line cross events and EMC EN300 386-2 (European Standard) • Safety UL 60950 and IEC 60950: Pending approvals SCHEMATIC 8 1 TX 9 2 VCC LINE SIDE GND 6 IC SIDE 7 3 10 5 RX 4 11 INCLUDES: ISOLATION TRANSFORMERS, PROTECTION COMPONENTS (LINE AND CHIP SIDE) SAFETY COMPONENTS: SRDA3.3-4 (SEMTECH), FUSE F1250T (TELELINK), SIDACTOR- P1800SC (TECCOR) MECHANICAL Side View Front View Bottom View Recommended PCB Layout 42.5 Max 8.5 Max 1 0.10 MAX 6 7 8 9 2.54 PITCH IN 7 PLACES 11.0 13.0 MAX SEATED HEIGHT 1 2 3 4 5 10 11 7.62 3.0 +/- 0.2 2.2 10.0 5.0 IN 2 PLACES 10.16 1.0 0.5 NOTE: ALL DIMENSIONS IN MM ©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1 T1/E1/J1 SMD Line Interface Hybrid for PMC Octal LIU APC82247s PACKAGING TAPETape FORMAT Format Tape Section TAPE SECTIONNo. CAVITIESCAVITY STATUS Number of Cavities Leader DIRECTION OF FEED Cover Tape Status SEALED 3.4M 170 pcs FILLED SEALED TRAILER 0.3M 15pcs EMPTY SEALED 0.3M 15pcs 0.3M 15 pcs Carrier Cavity Status COVER TAPE STATUS EMPTY CARRIER LEADER Empty Sealed 3.4M 170 pcs Filled Sealed 0.3M 15 pcs Empty Sealed Trailer TAPE DIMENSIONS USER DIRECTION OF FEED COVER TAPE 65 WIDE 20.00 14.00 MAX Ø1.50 2.00 +/- 0.15 4.00 1.75 X 34.20 +/- 0.20 72.00 68.40 SECTION X-X X Pin 1 of device to face this side of tape REEL DIMENSIONS 150.00 13.00 72.40 20.20 330 REFLOW PROFILE Recommended Reflow profile of Host PCB for APC SMT Parts The maximum temperature reached by the PCB was 214° C and was within 1° of this for 16 seconds. 250 The maximum rate of temperature change was 1.6° C / sec Temp Centigrade 200 150 100 50 0 0 100 200 300 400 500 600 Time Seconds PCB ©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 2