PHOTOCOUPLER PS2562-1,-2,-4,PS2562L-1,-2,-4 PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 HIGH ISOLATION VOLTAGE DARLINGTON TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2562-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2562-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2562L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. The PS2562L1-1, -2, -4 are lead bending type for long creepage distance. The PS2562L2-1, -2, -4 are lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES • High isolation voltage (BV = 5 000 Vr.m.s.) • High current transfer ratio (CTR = 2 000 % TYP.) • High-speed switching (tr, tf = 100 µs TYP.) • Ordering number of tape product: PS2562L-1-E3, E4, F3, F4, PS2562L-2-E3, E4, PS2562L2-1-E3, E4 • Safety standards • UL approved: File No. E72422 • BSI approved: No. 7112/7420 • CSA approved: No. CA 101391 • NEMKO approved: No. A21409 • SEMKO approved: No. 0144211 • DEMKO approved: No. 300535 • FIMKO approved: No. FI10620A1 • VDE approved (Option) APPLICATIONS • Power supply • Telephone/FAX. • FA/OA equipment • Programmable logic controller Document No. PN10235EJ02V0DS (2nd edition) Date Published December 2003 CP(K) The mark shows major revised points. PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type (New package) PS2562-1 4.6±0.35 3 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 7.62 3.5±0.3 3.2±0.4 4.15±0.4 TOP VIEW 4 0 to 15˚ +0.1 0.25 –0.05 1.25±0.15 0.50±0.10 0.25 M 2.54 Caution New package 1-ch only DIP Type PS2562-1 9.7±0.5 3 3.3±0.5 4.15±0.4 2 7.62 3.5±0.3 1 0 to 15˚ +0.1 0.25 –0.05 1.25±0.15 8 1 0.50±0.10 1.25±0.15 0.50±0.10 0.25 M TOP VIEW 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5±0.5 3.3±0.5 4.15±0.4 4 2 3 4 7.62 3.5±0.3 4.6±0.5 PS2562-2 TOP VIEW 0 to 15˚ +0.1 0.25 –0.05 0.25 M 2.54 2.54 PS2562-4 6.5±0.5 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 1 2 3.5±0.3 3.3±0.5 4.15±0.4 7.62 0.50±0.10 1.25±0.15 2.54 2 0 to 15˚ +0.1 0.25 –0.05 0.25 M Data Sheet PN10235EJ02V0DS 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Lead Bending Type (New package) PS2562L-1 TOP VIEW 4.6±0.35 4 3 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 2 0.1 +0.1 –0.05 3.5±0.3 0.25 +0.1 –0.05 1 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 Caution New package 1-ch only Lead Bending Type PS2562L-2 PS2562L-1 TOP VIEW 0.9±0.25 9.60±0.4 0.25 M 1 1.25±0.15 0.25 M 6 5 2 3 4 0.15 2.54 0.9±0.25 9.60±0.4 0.15 PS2562L-4 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 19.8±0.5 1.25±0.15 0.25 M 2.54 0.15 2 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0.1 +0.1 –0.05 0.25 +0.1 –0.05 1 3.5±0.3 2.54 7 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 3.5±0.3 0.1 +0.1 –0.05 3.5±0.3 0.25 +0.1 –0.05 2 1.25±0.15 8 6.5±0.5 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 9.7±0.5 3 0.1 +0.1 –0.05 4 0.25 +0.1 –0.05 4.6±0.5 0.9±0.25 9.60±0.4 Data Sheet PN10235EJ02V0DS 3 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Lead Bending Type For Long Creepage Distance (New Package) PS2562L1-1 TOP VIEW 4.6±0.35 4 3 1 2 1 2 10.16 3.5 ±0.3 3.15 3.85 ±0.35 ±0.4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5±0.5 4 0.50±0.1 0.25 M 1.25±0.15 +0.1 0.25–0.05 2.54 0 to 15˚ Lead Bending Type For Long Creepage Distance PS2562L1-2 PS2562L1-1 TOP VIEW 4.6±0.5 4 8 2 1 5 2 3 4 3.5±0.3 3.15±0.35 3.85±0.4 3.5±0.3 3.15±0.35 3.85±0.4 0.25 +0.1 –0.05 6 10.16 10.16 0 to 15˚ 7 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 9.7±0.5 3 0 to 15˚ 0.25 +0.1 –0.05 1.25±0.15 1.25±0.15 0.50±0.10 0.25 M 0.50±0.10 0.25 M 2.54 2.54 PS2562L1-4 TOP VIEW 19.8±0.5 16 15 14 13 12 11 10 9 6.5±0.5 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 1 2 3 4 5 3.5±0.3 3.15±0.35 3.85±0.4 10.16 0 to 15˚ 0.25 +0.1 –0.05 1.25±0.15 0.50±0.10 0.25 M 2.54 4 Data Sheet PN10235EJ02V0DS 6 7 8 Anode Cathode Emitter Collector PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 Lead Bending Type For Long Creepage Distance (Gull-Wing) (New Package) PS2562L2-1 TOP VIEW 4.6±0.35 4 3 1 2 3 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5±0.5 4 2 +0.1 0.25–0.05 3.5±0.3 0.25±0.2 1 0.9±0.25 0.25 1.25±0.15 0.25 M 10.16 +0.2 11.8–0.5 2.54 Lead Bending Type For Long Creepage Distance (Gull-Wing) PS2562L2-2 PS2562L2-1 TOP VIEW 8 0.9±0.25 1.25±0.15 11.8 +0.2 –0.5 0.25 M 2.54 6.5±0.5 1 10.16 0.25±0.2 0.25 +0.1 –0.05 3.5±0.3 2 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 3.5±0.3 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 9.7±0.5 3 2 3 4 10.16 0.25±0.2 4 0.25 +0.1 –0.05 4.6±0.5 0.9±0.25 1.25±0.15 11.8 +0.2 –0.5 0.25 M 0.25 0.25 2.54 PS2562L2-4 TOP VIEW 19.8±0.5 16 15 14 13 12 11 10 9 3.5±0.3 0.25 +0.1 –0.05 1 2 3 4 5 6 7 Anode Cathode Emitter Collector 8 10.16 0.25±0.2 6.5±0.5 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 0.9±0.25 1.25±0.15 11.8 +0.2 –0.5 0.25 M 2.54 0.25 Data Sheet PN10235EJ02V0DS 5 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 MARKING EXAMPLE PS2562-1 PS2562-2 No. 1 pin Mark No. 1 pin Mark 2562 M 003 M Country Assembled PS2562-2 M 003 Assembly Lot 0 03 Standard PKG New PKG 0 03 M Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Made in Japan Made in Taiwan Package Made in Japan Made in Taiwan Blank F Standard PKG E H New PKG Blank PS2562-4 No. 1 pin Mark Country Assembled PS2562-4 M 003 M Assembly Lot 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Made in Japan Made in Taiwan Standard PKG New PKG 6 Assembly Lot Data Sheet PN10235EJ02V0DS Blank F F PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) (1/2) Part Number Package Packing Style Safety Standard Approval PS2562-1 4-pin DIP Magazine case 100 pcs Standard products PS2562L-1 (UL, CSA, BSI, PS2562L1-1 NEMKO, SEMKO, PS2562L2-1 DEMKO, FIMKO PS2562L-1-E3 Embossed Tape 1 000 pcs/reel Application Part Number *1 PS2562-1 approved) PS2562L-1-E4 PS2562L-1-F3 Embossed Tape 2 000 pcs/reel PS2562L-1-F4 PS2562L2-1-E3 Embossed Tape 1 000 pcs/reel PS2562L2-1-E4 PS2562-2 8-pin DIP Magazine case 45 pcs PS2562-2 PS2562L-2 PS2562L1-2 PS2562L2-2 PS2562L-2-E3 Embossed Tape 1 000 pcs/reel PS2562L-2-E4 PS2562-4 16-pin DIP Magazine case 20 pcs 4-pin DIP Magazine case 100 pcs PS2562-4 PS2562L-4 PS2562L1-4 PS2562L2-4 PS2562-1-V PS2562L-1-V VDE approved PS2562-1 products (Option) PS2562L1-1-V PS2562L2-1-V PS2562L-1-V-E3 Embossed Tape 1 000 pcs/reel PS2562L-1-V-E4 PS2562L-1-V-F3 Embossed Tape 2 000 pcs/reel PS2562L-1-V-F4 PS2562L2-1-V-E3 Embossed Tape 1 000 pcs/reel PS2562L2-1-V-E4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10235EJ02V0DS 7 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead) (2/2) Part Number Package Packing Style Safety Standard Approval PS2562-2-V 8-pin DIP Magazine case 45 pcs PS2562L-2-V VDE approved Application Part Number PS2562-2 products (Option) PS2562L1-2-V PS2562L2-2-V PS2562L-2-V-E3 Embossed Tape 1 000 pcs/reel PS2562L-2-V-E4 PS2562-4-V 16-pin DIP Magazine case 20 pcs PS2562L-4-V PS2562L1-4-V PS2562L2-4-V *1 For the application of the Safety Standard, following part number should be used. 8 Data Sheet PN10235EJ02V0DS PS2562-4 *1 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Pb-Free) (1/2) Part Number Package Packing Style Safety Standard Approval PS2562-1-A 4-pin DIP Magazine case 100 pcs Standard products PS2562L-1-A (UL, CSA, BSI, PS2562L1-1-A NEMKO, SEMKO, PS2562L2-1-A DEMKO, FIMKO PS2562L-1-E3-A Embossed Tape 1 000 pcs/reel Application Part Number *1 PS2562-1 approved) PS2562L-1-E4-A PS2562L-1-F3-A Embossed Tape 2 000 pcs/reel PS2562L-1-F4-A PS2562L2-1-E3-A Embossed Tape 1 000 pcs/reel PS2562L2-1-E4-A PS2562-2-A 8-pin DIP Magazine case 45 pcs PS2562-2 PS2562L-2-A PS2562L1-2-A PS2562L2-2-A PS2562L-2-E3-A Embossed Tape 1 000 pcs/reel PS2562L-2-E4-A PS2562-4-A 16-pin DIP Magazine case 20 pcs 4-pin DIP Magazine case 100 pcs PS2562-4 PS2562L-4-A PS2562L1-4-A PS2562L2-4-A PS2562-1-V-A PS2562L-1-V-A VDE approved PS2562-1 products (Option) PS2562L1-1-V-A PS2562L2-1-V-A PS2562L-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2562L-1-V-E4-A PS2562L-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2562L-1-V-F4-A PS2562L2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2562L2-1-V-E4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10235EJ02V0DS 9 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ORDERING INFORMATION (Pb-Free) (2/2) Part Number Package Packing Style Safety Standard Approval PS2562-2-V-A 8-pin DIP Magazine case 45 pcs VDE approved PS2562L-2-V-A Application Part Number PS2562-2 products (Option) PS2562L1-2-V-A PS2562L2-2-V-A PS2562L-2-V-E3-A Embossed Tape 1 000 pcs/reel PS2562L-2-V-E4-A PS2562-4-V-A 16-pin DIP Magazine case 20 pcs PS2562-4 PS2562L-4-V-A PS2562L1-4-V-A PS2562L2-4-V-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings PS2562-1 Diode PS2562-2,-4 Reverse Voltage VR 6 V Forward Current (DC) IF 80 mA Power Dissipation Derating Power Dissipation Peak Forward Current Transistor Unit *1 ∆PD/°C 1.5 1.2 mW/°C PD 150 120 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 6 V Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 IC 200 160 mA/ch ∆PC/°C 2.0 1.6 mW/°C PC 200 160 mW/ch BV 5 000 Vr.m.s. Operating Ambient Temperature TA –55 to +100 °C Storage Temperature Tstg –55 to +150 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 10 Data Sheet PN10235EJ02V0DS *1 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Transistor Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz ICEO VCE = 40 V, IF = 0 mA CTR IF = 1 mA, VCE = 2 VDC Collector to Emitter Dark MIN. TYP. MAX. Unit 1.17 1.4 V 5 µA 50 pF 400 nA Current Coupled Current Transfer Ratio 200 2 000 % *1 (IC/IF) Collector Saturation VCE(sat) IF = 1 mA, IC = 2 mA 1.0 V Voltage Ω RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF *2 tr VCC = 10 V, IC = 10 mA, RL = 100 Ω 100 µs Rise Time *2 Fall Time tf 10 11 Isolation Resistance 100 *1 CTR rank (only PS2562-1, PS2562L-1, PS2562L1-1, PS2562L2-1) K : 2 000 to (%) L : 700 to 3 400 (%) M : 200 to 1 000 (%) *2 Test circuit for switching time Pulse Input VCC PW = 1 ms Duty Cycle = 1/10 IF 50 Ω VOUT RL = 100 Ω Data Sheet PN10235EJ02V0DS 11 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2562-1 100 PS2562-2,-4 1.5 mW/˚C 50 1.2 mW/˚C 0 25 50 75 100 125 1.6 mW/˚C 50 25 100 75 125 150 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 5 mA 140 TA = +100 ˚C +60 ˚C +25 ˚C 5 0 ˚C –25 ˚C –55 ˚C 1 0.5 120 100 80 2 mA 60 40 1 mA 20 0.8 50 FORWARD CURRENT vs. FORWARD VOLTAGE Collector Current IC (mA) Forward Current IF (mA) 0.9 1.0 1.1 1.2 1.4 1.3 0 1.5 IF = 0.5 mA 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 200 VCE = 2 V 5V 10 V 24 V 40 V 1000 100 10 1 –50 –25 0 25 50 75 100 2 mA 50 1 mA 10 0.5 mA 5 0.2 mA 1 0.5 0.2 0.4 Ambient Temperature TA (˚C) Remark 5 mA 100 10 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 2 mW/˚C 100 Ambient Temperature TA (˚C) 0.1 12 PS2562-1 PS2562-2,-4 Ambient Temperature TA (˚C) 10 0.7 150 0 150 100 50 200 IF = 0.1 mA 0.6 0.8 1.0 1.2 1.4 Collector Saturation Voltage VCE(sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10235EJ02V0DS 1.6 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 8 000 1.4 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 1.2 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.0 0.8 0.6 0.4 0.2 –25 0 50 25 75 3 000 2 000 1 000 0.1 100 1 5 10 30 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE CURRENT TRANSFER RATIO vs. FORWARD CURRENT 3 000 tf 100 50 Current Transfer Ratio CTR (%) VCC = 5 V, 500 IC = 2 mA, CTR = 2 280 % tr td 10 5 ts 100 500 1k VCE = 2 V 2 500 2 000 Sample A B C D 1 500 1 000 500 0 5k 10 50 100 500 Load Resistance RL (Ω) Forward Current IF ( µ A) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 10 000 5 000 tf VCC = 5 V, IF = 1 mA, CTR = 2 280 % 1 000 500 ts 100 50 tr IF = 1 mA, VCE = 2 V 0 Normalized Gain GV 2 30 50 0.5 Ambient Temperature TA (˚C) 1 000 Switching Time t ( µ s) 6 000 Sample A B C 5 000 D 4 000 0 –50 Switching Time t ( µ s) VCE = 2 V 7 000 –5 –10 –15 RL = 100 Ω –20 10 td 300 500 1k 5k 10 k 50 k 100 k Load Resistance RL (Ω) Remark 0.2 0.5 1 2 5 10 20 50 100 200 Frequency f (kHz) The graphs indicate nominal characteristics. Data Sheet PN10235EJ02V0DS 13 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 LONG TERM CTR DEGRADATION 1.2 IF = 1 mA CTR (Relative Value) 1.0 TA = 25 oC 0.8 TA = 60 oC 0.6 0.4 0.2 0 10 102 103 104 105 106 Time (Hr) Remark 14 The graphs indicate nominal characteristics. Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) 1.55±0.1 4.5 MAX. 10.3±0.1 7.5±0.1 φ 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.0±0.1 5.3±0.1 8.0±0.1 0.4 Tape Direction PS2562L-1-E3 PS2562L-1-E4 Outline and Dimensions (Reel) 2.0±0.5 φ 21.0±0.8 φ 80.0±1.0 R 1.0 φ 254±2.0 2.0±0.5 φ 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel Data Sheet PN10235EJ02V0DS 15.9 to 19.4 Outer edge of flange 15 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 1.55±0.1 4.5 MAX. 10.3±0.1 7.5±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.0±0.1 5.3±0.1 8.0±0.1 0.4 Tape Direction PS2562L-1-F3 PS2562L-1-F4 Outline and Dimensions (Reel) 2.0±0.5 φ 21.0±0.8 φ 100±1.0 R 1.0 φ 330±2.0 2.0±0.5 φ 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 16 Data Sheet PN10235EJ02V0DS 15.9 to 19.4 Outer edge of flang PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 2.05±0.1 4.4±0.2 12.35±0.15 11.5±0.1 1.55±0.1 24.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.38 6.6±0.2 12.0±0.1 Tape Direction PS2562L2-E3 PS2562L2-E4 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 25.5±1.0 29.5±1.0 Packing: 1 000 pcs/reel Data Sheet PN10235EJ02V0DS 23.9 to 27.4 Outer edge of flange 17 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 4.5 MAX. 10.3±0.1 7.5±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.0±0.1 10.4±0.1 1.55±0.1 12.0±0.1 0.3 Tape Direction PS2562L-2-E4 PS2562L-2-E3 Outline and Dimensions (Reel) R 1.0 100±1.0 2.0±0.5 13.0±0.2 330±2.0 2.0±0.5 21.0±0.8 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 18 Data Sheet PN10235EJ02V0DS 15.9 to 19.4 Outer edge of flang PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10235EJ02V0DS 19 PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 20 Data Sheet PN10235EJ02V0DS PS2562-1,-2,-4,PS2562L-1,-2,-4,PS2562L1-1,-2,-4,PS2562L2-1,-2,-4 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages ≤ 300 Vr.m.s. IV for rated line voltages ≤ 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test procedure a for type test and random test) UIORM 890 Vpeak Upr = 1.2 × UIORM, Pd < 5 pC Upr 1 068 Vpeak Test voltage (partial discharge test procedure b for all devices test) Upr 1 424 Vpeak UTR 8 000 Vpeak Upr = 1.6 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) 2 Clearance distance > 7.0 mm Creepage distance > 7.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg –55 to +150 °C Operating temperature range TA –55 to +100 °C Isolation resistance, minimum value VIO = 500 V dc at TA = 25 °C Ris MIN. 10 12 Ω VIO = 500 V dc at TA MAX. at least 100 °C Ris MIN. 10 11 Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Tsi 175 °C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Ris MIN. 10 Isolation resistance VIO = 500 V dc at TA = 175 °C (Tsi) Data Sheet PN10235EJ02V0DS 9 Ω 21 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.