DATA SHEET PHOTOCOUPLER PS2534-1,-2,-4,PS2534L-1,-2,-4 PS2535-1,-2,-4,PS2535L-1,-2,-4 HIGH COLLECTOR TO EMITTER VOLTAGE HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES −NEPOC TM Series− DESCRIPTION The PS2534-1, -2, -4, PS2534L-1, -2, -4, PS2535-1, -2, -4 and PS2535L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor. The PS2534-1, -2, -4 and PS2535-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2534L-1, -2, -4 and PS2535L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES • High collector to emitter voltage (VCEO = 300 V: PS2534-1, -2, -4, PS2534L-1, -2, -4) (VCEO = 350 V: PS2535-1, -2, -4, PS2535L-1, -2, -4) • High isolation voltage (BV = 5 000 Vr.m.s.) • High current transfer ratio (CTR = 1 500 % TYP.) • Ordering number of taping product:PS2534L-1-E3, E4, F3, F4, PS2534L-2-E3, E4 PS2535L-1-E3, E4, F3, F4, PS2535L-2-E3, E4 APPLICATIONS • Telephone, Exchange equipment • FAX/MODEM The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P14066EJ2V0DS00 (2nd edition) Date Published June 1999 NS CP(K) Printed in Japan The mark • shows major revised points. © 1999 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 PACKAGE DIMENSIONS (in millimeters) DIP type PS2534-1 PS2535-1 4.6±0.5 PS2534-2 PS2535-2 9.7±0.5 TOP VIEW 4 8 7 6 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 2 1 2 3 4 0 to 15˚ +0.1 0.25 –0.05 3.5±0.3 3.3±0.5 4.15±0.4 7.62 3.5±0.3 3.3±0.5 4.15±0.4 7.62 1.25±0.15 5 6.5 +0.7 –0.5 6.5 +0.7 –0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 3 0.50±0.10 0.25 M 0 to 15˚ 0.25 +0.1 –0.05 0.50±0.10 0.25 M 1.25±0.15 2.54 2.54 PS2534-1 PS2535-1 4.6±0.35 PS2534-4 PS2535-4 13 12 11 1 2 3 4 5 6 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 6.5 +0.7 –0.5 6.5 +0.7 –0.5 19.8±0.5 2 10 9 7 8 0 to 15˚ 0.25 +0.1 –0.05 0.50±0.10 0.25 M Anode Cathode Emitter Collector 3.5±0.3 7.62 3.3±0.5 4.15±0.4 3.5±0.3 7.62 3.2±0.4 4.15±0.4 14 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 1.25±0.15 0 to 15˚ 0.25 +0.1 –0.05 2.54 2.54 2 15 TOP VIEW 4 1.25±0.15 TOP VIEW 16 Data Sheet P14066EJ2V0DS00 0.50±0.10 0.25 M PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 Lead bending type PS2534L-1 PS2535L-1 9.7±0.5 TOP VIEW 8 1 3.5±0.3 0.25 +0.1 –0.05 4 2.54 0.15 9.60±0.4 PS2534L-4 PS2535L-4 TOP VIEW 16 15 14 13 12 11 1 2 3 4 5 6 10 9 7 8 TOP VIEW 4 3 2.54 9.60±0.4 Anode Cathode Emitter Collector 0.25 +0.1 –0.05 0.05 to 0.2 0.9±0.25 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. 6.5 +0.7 –0.5 2 0.25 +0.1 –0.05 1 19.8±0.5 3.5±0.3 6.5 +0.7 –0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 0.05 to 0.2 3.5±0.3 3 0.15 4.6±0.35 3.5±0.3 5 0.9±0.25 0.25 M 9.60±0.4 PS2534L-1 PS2535L-1 1.25±0.15 0.25 M 2 1.25±0.15 0.9±0.25 2.54 6 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 2 0.05 to 0.2 1 7 6.5 +0.7 –0.5 6.5 +0.7 –0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1.25±0.15 0.25 M TOP VIEW 3 0.05 to 0.2 4 0.25 +0.1 –0.05 4.6±0.5 PS2534L-2 PS2535L-2 1.25±0.15 0.25 M 0.9±0.25 2.54 0.15 9.60±0.4 0.15 Data Sheet P14066EJ2V0DS00 3 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 Lead bending type for long distance PS2534L1-1 PS2535L1-1 PS2534L2-1 PS2535L2-1 4.6±0.5 4.6±0.5 TOP VIEW TOP VIEW 3 4 1 3 1. Anode 2. Cathode 3. Emitter 4. Collector +0.7 6.5 –0.5 +0.7 1. Anode 2. Cathode 3. Emitter 4. Collector 6.5 –0.5 4 2 1 2 10.16 0 to 15˚ 1.25±0.15 1.25±0.15 0.25 M 0.25 +0.1 –0.05 0.9±0.25 11.8 +0.2 –0.5 2.54 0.25 0.50±0.10 0.25 M 2.54 0.25±0.2 0.25 +0.1 –0.05 3.5±0.3 3.5±0.3 3.15±0.35 3.85±0.4 10.16 PS2534L1-1 PS2535L1-1 PS2534L2-1 PS2535L2-1 4.6±0.35 4.6±0.35 TOP VIEW TOP VIEW 4 3 6.5 +0.7 –0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 10.16 1.25±0.15 0.25 M 0.25 +0.1 –0.05 0.9±0.25 11.8 +0.2 –0.5 2.54 0.25 1.25±0.15 0.50±0.10 0.25 M 2.54 4 0.25 +0.1 –0.05 3.5±0.3 3.5±0.3 3.15±0.35 3.85±0.4 10.16 0 to 15˚ 2 Data Sheet P14066EJ2V0DS00 0.25±0.2 1 3 6.5 +0.7 –0.5 4 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 ORDERING INFORMATION Part Number PS2534-1 Package 4-pin DIP Packing Style Magazine case 100 pcs *1 Application Part Number PS2534-1 PS2534L-1 PS2534L-1-E3 Embossed Tape 1 000 pcs/reel PS2534L-1-E4 PS2534L-1-F3 Embossed Tape 2 000 pcs/reel PS2534L-1-F4 PS2534-2 8-pin DIP Magazine case 45 pcs PS2534-2 PS2534L-2 PS2534L-2-E3 Embossed Tape 1 000 pcs/reel PS2534L-2-E4 PS2534-4 16-pin DIP Magazine case 20 pcs PS2534-4 4-pin DIP Magazine case 100 pcs PS2535-1 PS2534L-4 PS2535-1 PS2535L-1 PS2535L-1-E3 Embossed Tape 1 000 pcs/reel PS2535L-1-E4 PS2535L-1-F3 Embossed Tape 2 000 pcs/reel PS2535L-1-F4 PS2535-2 8-pin DIP Magazine case 45 pcs PS2535-2 PS2535L-2 PS2535L-2-E3 Embossed Tape 1 000 pcs/reel PS2535L-2-E4 PS2535-4 16-pin DIP Magazine case 20 pcs PS2535-4 PS2535L-4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet P14066EJ2V0DS00 5 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Ratings Diode Parameter Symbol Forward Current (DC) IF 50 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 PS2534-1, PS2534L-1 PS2534-2, -4, PS2534L-2, -4 PS2535-1, PS2535L-1 PS2535-2, -4, PS2535L-2, -4 Unit ∆PD/°C 0.7 0.55 0.7 0.55 mW/°C PD 70 55 70 55 mW/ch IFP 0.5 A Collector to Emitter Voltage VCEO Emitter to Collector Voltage VECO 0.3 V IC 100 mA/ch Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 300 350 V ∆PC/°C 2.0 1.6 2.0 1.6 mW/°C PC 200 160 200 160 mW/ch BV 5 000 Vr.m.s. Operating Ambient Temperature TA −55 to +100 °C Storage Temperature Tstg −55 to +150 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 6 Data Sheet P14066EJ2V0DS00 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz MIN. TYP. MAX. Unit 1.2 1.4 V 5 µA 30 pF Transistor Collector to Emitter Dark Current ICEO VCE = 300 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 1 mA, VCE = 2 V Collector Saturation Voltage VCE (sat) IF = 1 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.6 pF *2 tr VCC = 5 V, IC = 10 mA, RL = 100 Ω 18 µs Rise Time Fall Time *2 400 1 500 nA 5 500 % 1.0 V Ω 11 10 tf *1 CTR rank (only PS2534-1, PS2535-1) 400 5 *2 Test circuit for switching time N : 400 to 5 500 (%) Pulse input L : 1 500 to 5 500 (%) VCC IF PW = 1 ms, Duty cycle = 1/10 In monitor VOUT 50 Ω Data Sheet P14066EJ2V0DS00 RL = 100 Ω 7 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 60 0.7 mW/˚C PS2534-2, -4 PS2535-2, -4 40 0.55 mW/˚C 20 0 25 100 75 50 240 220 200 180 160 140 120 100 80 60 40 20 PS2534-1 PS2535-1 2.0 mW/˚C PS2534-2, -4 PS2535-2, -4 1.6 mW/˚C 25 0 100 75 50 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 TA = +100 ˚C +60 ˚C +25 ˚C 50 Forward Current IF (mA) Transistor Power Dissipation PC (mW) PS2534-1 PS2535-1 80 Collector Current IC (mA) Diode Power Dissipation PD (mW) 100 10 5 0 ˚C –25 ˚C –50 ˚C 1 0.5 5 mA 3 mA 2 mA 50 1 mA 10 5 IF = 0.5 mA 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1 0.4 1.5 0.8 1.0 1.2 1.4 1.6 Collector Saturation Voltage VCE(sat) (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 100 000 VCEO = 300 V 10 000 CTR = 1 068 % 2 290 % 4 360 % 1 000 100 10 1 –50 –25 3 mA 5 mA 0 25 50 75 2 mA 50 1 mA 10 100 5 IF = 0.5 mA 1 0 1 2 3 4 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (˚C) 8 0.6 Forward Voltage VF (V) Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 0.7 Data Sheet P14066EJ2V0DS00 5 # PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 4 500 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 1.2 1.0 0.8 0.6 0.4 0.2 0.0 –50 –25 0 25 75 50 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERTURE VCE = 2 V 4 000 3 500 3 000 2 500 2 000 1 500 1 000 500 0 0.1 100 0.5 10 40 LONG TERM CTR DEGRADATION 1 000 1.2 VCC = 10 V, IC = 10 mA, CTR = 1 800 % IF = 1 mA 100 tf td 10 ts 1 TA = 25 ˚C 1.0 tr CTR (Relative Value) Switching Time t ( µs) 5 Forword Current IF (mA) Ambient Temperature TA (˚C) SWITCHING TIME vs. LORD RESISTANCE 1 0.8 TA = 60 ˚C 0.6 0.4 0.2 0.1 10 50 100 500 1000 0.0 10 Load Resistance RL (Ω) 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet P14066EJ2V0DS00 9 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 TAPING SPECIFICATIONS (in millimeters) 4.3±0.2 10.3±0.1 7.5±0.1 1.55±0.1 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 1.55±0.1 5.6±0.1 8.0±0.1 Tape Direction PS2534L-1-E3 PS2535L-1-E3 PS2534L-1-E4 PS2535L-1-E4 Outline and Dimensions (Reel) 1.6 R 1.0 φ 21.0±0.8 φ 80.0±5.0 φ 250 2.0±0.5 φ 13.0±0.5 16.4 +2.0 –0.0 Packing: 1 000 pcs/reel 10 Data Sheet P14066EJ2V0DS00 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 4.3±0.2 10.3±0.1 7.5±0.1 1.55±0.1 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 1.55±0.1 5.6±0.1 8.0±0.1 Tape Direction PS2534L-1-F3 PS2535L-1-F3 PS2534L-1-F4 PS2535L-1-F4 Outline and Dimensions (Reel) 1.5 R 1.0 φ 21.0±0.8 φ 80.0±5.0 φ 330 2.0±0.5 φ 13.0±0.5 16.4 +2.0 –0.0 Packing: 2 000 pcs/reel Data Sheet P14066EJ2V0DS00 11 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 4.3±0.2 10.3±0.1 7.5±0.1 1.55±0.1 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 10.4±0.1 1.55±0.1 12.0±0.1 Tape Direction PS2534L-2-E4 PS2535L-2-E4 PS2534L-2-E3 PS2535L-2-E3 Outline and Dimensions (Reel) 1.5 R 1.0 φ 21.0±0.8 φ 80.0±5.0 φ 330 2.0±0.5 φ 13.0±0.5 16.4 +2.0 –0.0 Packing: 1 000 pcs/reel 12 Data Sheet P14066EJ2V0DS00 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 °C (package surface temperature) • Time of temperature higher than 210 °C 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 120 to 160 ˚C 60 to 90 s (preheating) Time (s) (2) Dip soldering • Temperature 260 °C or below (molten solder temperature) • Time 10 seconds or less • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet P14066EJ2V0DS00 13 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 [MEMO] 14 Data Sheet P14066EJ2V0DS00 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 [MEMO] Data Sheet P14066EJ2V0DS00 15 PS2534-1,-2,-4,PS2534L-1,-2,-4,PS2535-1,-2,-4,PS2535L-1,-2,-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. • The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. • Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8