General Purpose Rectifier 1N5400-G thru 1N5408-G (RoHS Device) Voltage: 50 ~ 1000 Volts Current: 3.0 Amp Features: Low forward voltage drop DO-201AD High current capability .052 (1.3) DIA. .048 (1.2) Low reverse leakage current 1.0 (25.4) MIN. High surge current capability Mechanical Data: Case: Molded plastic DO-201AD Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 1.1gram .375 (9.5) .285 (7.2) .210 (5.3) .190 (4.8) 1.0 (25.4) MIN. Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ºC unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate currently by 20%. Characteristics Symbol 1N 1N 1N 1N 1N 1N 1N 5400-G 5401-G 5402-G 5404-G 5406-G 5407-G 5406-G UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Max. Average Forward Rectified Current@ TL = 75ºC I(AV) 3.0 A Peak Forward Surge Current 8.3ms Single half-sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Max. Instantaneous Forward Voltage @ 3.0A VF 0.95 V Max. DC Reverse Current @ TJ = 25ºC At Rated DC Blocking Voltage @ TJ = 100ºC IR 5.0 uA uA Typical Junction Capacitance (Note1) CJ 40 pF RθJC 15 ºC/W TJ, TSTG -55 to +125 ºC Typical Thermal Resistance (Note2) Operating Junction and Storage 250 Temperature Range Note: (1) Thermal resistance junction to lead. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. “-G” suffix designated RoHS compliant version Comchip Technology Corporation . Tel:510-657-8671 . Fax: 510-657-8921 . www.comchiptech.com Page1 General Purpose Rectifier 1N5400-G thru 1N5408-G (RoHS Device) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 3.0 2.5 2.0 1.5 1.0 0.5 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 125 100 75 50 25 0 0 0 50 100 150 1 LEAD TEMPERATURE, C 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60Hz o 1.0 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=100 C 10 1 o TJ=25 C 0.1 0.01 0 1.6 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 100 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 10 1 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS “-G” suffix designated RoHS compliant version Comchip Technology Corporation . Tel:510-657-8671 . Fax: 510-657-8921 . www.comchiptech.com Page2