Cree® 5-mm Round LED Model # LC503NPP1-20H-A3 Data Sheet 20-degree, 5-mm round LED lamp in full color with water-transparent lens and no stopper Applications • • • • Office Equipment Communications Equipment Measurement Equipment Household Appliances Absolute Maximum Ratings (TA = 25°C) Absolute Maximum Rating Items Symbol Unit R G B IF 50 25 25 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 125 100 100 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Forward Current Peak Forward Current Note Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Values Characteristics Condition Forward Voltage IF = 20 mA Reverse Current VR = 5 V D-CT093.000 Data Sheet: CL Dominant Wavelength IF = 20 mA Symbol Unit R G B VF(avg) 2.0 3.4 3.4 V VF(max) 2.5 4.0 4.0 V IR(max) 100 100 100 μA λD(min) 620 520 465 nm λD(typ) 624 527 470 nm λD(max) 628 540 480 nm Luminous Intensity IF = 20 mA IV 770~4180 550~4180 200~1100 mcd 50% Power Angle IF = 20 mA 2θ½ 20 20 20 °C Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is ±15%. 4. Tolerance of measurement of dominant wavelength is ±1 nm. 5. Tolerance of measurement of VF is ±0.05 V. 6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Subject to change without notice. www.cree.com/ledlamps Document No. SPE/LC503NPP1-20H-A3 Rev. No. 04 Graphs Graphs Items Signatures Date Prepared by LiuZM 2006-12-22 Rev. No Checked by Aldosin 2006-12-22 02 2006-08-29 Change CIE to IV range; Change ȜD(max) of blue from 475 Approved by David 2006-12-22 03 2006-12-06 Release. Change IV(R) from 770~3000 to 770~4180mcd, 04 2006-12-22 Correct: add Important Notes. FCN# FCN20060423 Revision History Date Change Description to 480nm, Change ȜD(max) of green from 535 to 540nm. IV(G) from 550~3000mcd to 550~4180mcd, IV(B) from 200~770mcd to 200~1100mcd. Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT093.000 3/3 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Mechanical Dimensions Document No. SPE/LC503NPP1-20H-A3 All dimensions are in mm. Tolerance is ±0.25Rev. mm unless noted. No. otherwise04 An epoxy meniscus may extend about 1.5 mm down the leads. Dimension Drawing im0.5 enmm sion Drawing Burr around bottom of epoxy mayDbe max. = 25°C Absolute maximum Rating Unit R G B 0 25 25 mA 00 100 100 mA 5 5 5 V 25 100 100 mW -40 ~ +95 °C -40 ~ +100 °C Max.260°C for 3 sec Max. Notes m from the base of the epoxy bulb) RoHS Compliance of 2 environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or 5°C) cteristiThe cs levels ( Ta = otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecValues tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment Condition Symbol Unit (RoHS), as amended through April 21, 2006. R G B Vision Advisory V Claim 2.0 3.4 3.4 V F(avg) IF=20mA Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. VF(max) 2.5 4.0 4.0 V VR=5V IR(max) 100 100 100 ȝA ȜD 620 465without notice. Cree andnm (min) Copyright © 2007 Cree, Inc. All rights reserved. The information in this520 document is subject to change the Cree logo are registered trademarks of Cree, Inc. IF=20mA CLD-CT093.000 ȜD(typ) 624 527 470 nm Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . :special request * Packing type 0: Standard = Bulk pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LC503NPP1-20H-A3-00001 Description 5mm Round 20 Full Color, FULL RANK, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT093.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps