Cree® 5-mm Round LED Model # LC503TYL1-30P-A1 Data Sheet 30-degree, 5-mm round LED lamp in amber color with water-transparent lens and stopper Applications • • • • Advertising Signs Indicators Traffic Signals Automotive Lighting Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 50 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Forward Current Peak Forward Current Note Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Forward Voltage VF IF = 20 mA V Reverse Current IR VR = 5 V μA Dominant Wavelength λD IF = 20 mA nm 584 591 IV IF = 20 mA mcd 2130 3300 2θ½H-H IF = 20 mA deg Luminous Intensity Typical Maximum 2.3 2.6 100 596 30 D-CT091.000 Data Sheet: CL 50% Power Angle Minimum Subject to change without notice. www.cree.com/ledlamps Standard Bins for LC503TYL1-30P-A1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LC503TYL1-30P-A1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) X2 X3 X4 X5 Y or above 5860 mcd X 4180 mcd W 3000 mcd V 2130 mcd 584 nm 587 nm 590 nm 593 nm 596 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is ±15%. 4. Tolerance of measurement of the dominant wavelength is ±1 nm. 5. Tolerance of measurement of VF is ±0.05 V. 6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT091.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LC503TYL1-30P-A1 Rev. No. 03 Graphs Graphs 100.0 -50 -60 Vr(V) If (mA) -20 -30 -40 -10 0.0 -10.0 80.0 -20.0 60.0 -30.0 40.0 -40.0 20.0 Vf(V) 0.0 2.0 Ir(uA) 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=20nm Domi WL= 591nm 5.0 I (RELATIVE LUMINOUS INTENSITY) 100% 4.0 75% 3.0 50% 2.0 25% 1.0 0% 400 If(mA) 0.0 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. 100 500 WL(nm) 900 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. IF(mA) 50% Power Angle : 30 Ie(%) 0 100% 80% 40 60% 20 40% Ta( C) 0.0 20.0 40.0 60.0 80.0 100.0 Signatures Date LiuZM 2006-04-03 20% 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) -90 -60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN Revision History Rev. No Checked by Aldosin 2006-04-03 B Approved by David 2006-04-03 03 FCN# 800 60 0 Prepared by 700 600 80 Items -50.0 Date Change Description 04Aug04 Add ESD and Notes; Change FIG.1&3&5; Change IV & OD Rank form. 2006-04-03 Cancel VF bin. FCN20060081 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT091.000 4/4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Mechanical Dimensions Document No. SPE/LC503TYL1-30P-A1 Rev. No. 03 All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Dimension Drawing Burr around bottom of epoxy may be 0.5 mm max. C te maximum Unit Rating 50 mA 200 mA 5 V 130 mW 0 ~ + 95 °C 0 ~ +100 °C 60°C for 3 sec Max. Notes the base of the epoxy bulb) RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or s between 10mA and 30mA are recommended. Please contact COTCO otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- commended drive conditions. tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. tics ( Ta = 25°C) Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Condition Min. Typ. Max. Unit Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the IF = 20mA V --- of Cree, Inc. 2.3 2.6 Cree logo are registered trademarks CLD-CT091.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . :special request * Packing type 0: Standard = Bulk pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LC503TYL1-30P-A1-00001 5mm Round 30 Amber 591nm, FULL RANK, Bulk Pack LC503TYL1-30P-A1-00002 5mm Round 30 Amber 591nm, V or above, X3, X4, X5, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT091.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps