Cree® SMD LED Model # LM1-THR1-01-N1 Data Sheet 120-degree, 3.2 x 2.7 mm, SMT LED in red color with water-transparent lens Applications • • • • • Indicators Illuminations LCD Back Lights Automobile Applications Blue Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 50 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 450 °C/W RTHJS 300 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT182.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Forward Voltage VF IF = 20 mA V Reverse Current IR VR = 5 V μA Luminous Intensity IV IF = 20 mA mcd 280 400 λD IF = 20 mA nm 620 628 2θ½ IF = 20 mA deg Dominant Wavelength 50% Power Angle Minimum Subject to change without notice. www.cree.com/ledlamps Typical Maximum 2.3 2.6 10 635 120 Standard Bins for LM1-THR1-01-N1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-THR1-01-N1 may be filled with any or all bins contained as below. Luminous Intensity (IV) All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. U2 or above 560 mcd U1 450 mcd T2 355 mcd T1 280 mcd 620 nm 635 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT182.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-THR1-01-N1 Rev. No. 01 Graphs Graphs If (mA) 100.0 -50 -60 -40 -20 -30 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 0.0 2.0 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -40.0 Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 628nm 5.0 100% 4.0 3.0 75% 2.0 50% 25% 1.0 If(mA) 0.0 0.0 0% 400 20.0 40.0 60.0 80.0 100.0 500 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. FIG.3 RELATIVE INTENSITY VS. FORWARD CURRENT 100 -50.0 IF(mA) 50% Power Angle : Ie(%) 0 80 100% Rth j-s=300 C/W 80% 60 60% 40 40% 20 0 Rth j-a=450 C/W 0 20 40 60 20% T ( C) 80 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Signatures Date Prepared by Meiliping 2005-08-17 Checked by XieJH 2005-08-17 Approved by DavidLiu 2005-08-17 FCN# -60 -30 0 30 90 0% FIG.6 FAR FIELD PATTERN Revision History Rev.No Date Change Description FCN20050260 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 International Ltd. Copyright © 2007 Cree,Cotco Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 60 CLD-CT182.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions Document No. SPE/LM1-THR1-01-N1 Rev. No. 01 Dimension Drawing All dimensions are in mm. cations splays tings at Ta = 25°C Absolute maximum Symbol Rating Unit IF 50 mA IFP 200 mA VR 5 V PD 130 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 450 °C/W Rth JS 300 °C/W 2 uty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) tical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 20mA --- 2.3 2.6 V VR = 5V --- --- 10 PA Notes IR RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or values (also referred to as the IVotherwiseIFrestricted = 20mA materials mcd 280in this product 400are below the---maximum concentration threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. IF = 20mA OD 620 628 635 nm Vision Advisory Claim IF = 20mA --- to stare at the 120light of this LED --- product. The degbright light can damage the eye. 2 T½ Users should be cautioned not Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT182.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-THR1-01-N1-00001 Description SMD 120 High Red 628nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT182.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps