Cree® SMD LED Model # LP6-PPG1-03-N1 Data Sheet 120-degree, 6.0 x 5.0 mm, SMT LED in green color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 3 x 50 mA IFP 3 x 100 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 255 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 3 x 300 °C/W RTHJS 3 x 160 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥40 mm2) D-CT159.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Forward Voltage VF IF = 3 x 50 mA V Reverse Current IR VR = 5 V μA Luminous Flux θV IF = 3 x 50 mA mlm Luminous Intensity IV IF = 3 x 50 mA mcd 1800 3500 514 524 Dominant Wavelength 50% Power Angle Unit λD IF = 50 mA nm 2θ½ IF = 3 x 50 mA deg Minimum Subject to change without notice. www.cree.com/ledlamps Typical Maximum 4.0 5.1 10 7000 534 120 Standard Bins for LP6-PPG1-03-N1 (IF = 3 x 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LP6-PPG1-03-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 3 x 50 mA. Z1 or above Luminous Intensity (IV) 4500 mcd (15 lm) Y2 (R) 3550 mcd (10 lm) Y1 (P) 2800 mcd (8 lm) X2 (N) 2240 mcd (6 lm) X1 (M) 1800 mcd (5 lm) 514 nm 534 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT159.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. Graphs Graphs SPE/LP6-PPG1-03-N1 03 Graphs 100.0 -50 If (mA) -30 -40 -10 -20 0 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 0.0 3.2 3.6 4.0 4.4 4.8 5.2 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=38nm Domi WL= 524nm (RELATIVE LUMINOUS INTENSITY) 100% 2.5 RELATIVE LUMINOUS INTENSITY -50.0 2.0 75% 1.5 50% 1.0 25% 0.5 If(mA) 0.0 0.0 20.0 40.0 60.0 0% 300 80.0 100.0 400 500 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. FIG.3 FORWARD CURRENT. WAVELENGTH. 100 IF(mA) 50% Power Angle : 80 Ie(%) 0 Rth JA = 150 C/W 100% 60 80% 40 60% R th 20 0 JS = 300 C/W 40% T ( C) 0 20 40 60 80 20% 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Signatures -60 -30 0 30 90 0% FIG.6 SPATIAL DISTRIBUTION. Date Revision History Prepared by WangFJ 2007-01-11 Rev.No Checked by XieJH 2007-01-11 02 2006-12-11 Approved by DavidLiu 2007-01-11 03 2007-01-10 Change VF(typ)4.5 to 4.0 ,Change Graphs. FCN# Date Change Description Release. Change Iv rank: from X1-Y1 to X1-Y2 FCN20070014 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 International Ltd. Copyright © 2007 Cree, Inc.Cotco All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 60 CLD-CT159.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. Mechanical Dimensions SPE/LP6-PPG1-03-N1 03 Dimension Drawing All dimensions are in mm. ications tings at Ta = 25°C Absolute maximum Symbol Unit Rating IF 3 x 50 mA IFP 3x100 mA VR 5 V PD 3x255 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 3 x 300 °C /W Rth JS 3 x 160 °C /W ESD Class 1 2 uty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=40mm ) pttical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 3 x 50mA --- 4.0 5.1 V IR NotesVR = 5V --- --- 10 PA ĭV RoHSIFCompliance = 3 x 50mA --- 7000 --- mlm environmentally biologically toxic (PBT),mcd persistent organic pollutants (POP), or IV The levels IF = 3 xof50mA 1800sensitive, persistent 3500 --- otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc514 524of certain hazardous 534 nm in electrical and electronic equipment IF = 3 x 50mA OD tive 2002/95/EC on the restriction of the use substances (RoHS), as amended through April 21, 2006. IF = 3 x 50mA 2 T½ --- 120 --- deg Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT159.000 2/4 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP6-PPG1-03-N1-00001 Description SMD 120 Pure Green 524nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT159.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps