CREE LO566TWN1-70G-A1

Cree® 5-mm Oval LED
Model # LO566TWN1-70G-A1
Data Sheet
70-degree, 5-mm round LED lamp in white color with water-transparent lens and stopper
Applications
•
•
•
Indicators
LCD Back Light
Illuminations
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
25
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Forward Current
Peak Forward Current
Note
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Note: Pulse width ≤0.1 msec, duty ≤1/10.
D-CT103.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Symbol
Condition
Unit
Forward Voltage
VF
IF = 20 mA
V
Forward Voltage
VF
IF = 1.0 µA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Intensity
IV
IF = 20 mA
mcd
Chromaticity
Coordinates
x
IF = 20 mA
50% Power Angle
Minimum
Typical
Maximum
3.4
4.0
1.7
2.5
100
1520
2300
0.31
y
IF = 20 mA
2θ½H-H
IF = 20 mA
deg
0.32
70
2θ½V-V
IF = 20 mA
deg
40
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LO566TWN1-70G-A1 (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown.
Orders for LO566TWN1-70G-A1 may be filled with any or all bins contained as below.
All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA.
Luminous Intensity (IV)
A1
A2
B1
B2
c
W or
above
3000 mcd
V
2130 mcd
U
1520 mcd
Chromaticity Coordinates (x,y)
Rank
Chromaticity x
Coordinates y
A1
A2
0.245
0.264
0.280
0.264
0.264
0.283
0.296
0.280
0.283
0.307
0.313
0.296
0.229
0.267
0.248
0.220
0.267
0.305
0.276
0.248
0.305
0.337
0.297
0.276
Rank
Chromaticity x
Coordinates y
B1
B2
c
0.307
0.330
0.330
0.313
0.330
0.361
0.356
0.330
0.337
0.360
0.318
0.297
0.360
0.385
0.351
0.318
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Pb content <1000 ppm.
3. Tolerance of measurement of luminous intensity is ±15%.
4. Tolerance of measurement of the chromaticity coordinates is ±0.01.
5. Tolerance of measurement of VF is ±0.05 V.
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT103.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE
CIE Chromaticity Diagram
0.90
520
530
0.80
540
510
550
0.70
560
0.60
570
490
0.50
Y
580
590
0.40
600
c
610
620
630
B2
0.30
B1
480
A2
A1
0.20
470
0.10
460
0.00
0.00
0.10
0.20
0.30
4/5
X
0.40
0.50
0.60
CLD-CT103.000
0.80
Format #: COTCO-D-074 REV.4
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
0.70
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LO566TWN1-70G-A1
Rev. No.
04
Graphs
Graphs
100.0
If (mA)
Vr(V)
-50
-40
-30
-20
-10
0
0.0
-10.0
80.0
-20.0
60.0
-30.0
40.0
-40.0
20.0
0.0
3.0
-50.0
Ir(uA)
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
Vf(V)
3.4
3.8
4.2
4.6
5.0
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Half Power
WL=150nm
100%
5.0
75%
4.0
50%
3.0
25%
2.0
0%
1.0
0.0
0.0
If(mA)
20.0 40.0 60.0
400
500
600
700
800
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
80.0 100.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
50
IF(mA)
H-H : 70
V-V : 40
50% Power Angle :
H-H
40
V-V
Ie(%)
0
100%
30
80%
20
60%
10
0
40%
Ta( C)
0.0
20.0 40.0 60.0
20%
80.0 100.0
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
AMBIENT TEMPERATURE (Tjmax=105 C)
Items
-60
-30
0
30
60
90
0%
FIG.6 FAR FIELD PATTERN
Signatures
Date
Prepared by
LiuZM
2007-04-26
Rev. No
Checked by
HuangJD
2007-04-26
02
2005-08-19 Release. IV from U,V,W(typ)2400 to U,V(typ)2300mcd.
Approved by
David
2007-04-26
03
2006-04-17 Cancel VF bin.
04
2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01
FCN#
FCN20070432
Revision History
Date
Change Description
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright@2002 Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT103.000
5/5
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074 REV.4
Mechanical Dimensions
Document No. SPE/LO566TWN1-70G-A1
All dimensions are in mm. Tolerance is ±0.25
Rev. mm
No.unless otherwise
04 noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Dim
enbesi0.5
onmm
Drmax.
awing
Burr around bottom of epoxy
may
C
e maximum
Unit
Rating
25
mA
100
mA
5
V
100
mW
0 ~ +95
°C
~ +100
°C
60°C for
3 sec Max.
Notes
the base of the epoxy bulb)
RoHS Compliance
tiics (
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc25 ) on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Ttive
a =2002/95/EC
(RoHS), as amended through April 21, 2006.
°C
Vision Advisory Claim
Condition
Min. not to stare atTyp.
Unitcan damage the eye.
Users should be cautioned
the light of this LEDMax.
product. The bright light
IF = 20mA
---
3.4
4.0
V
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
IF = 1.0P$
1.7
CLD-CT103.000
---
2.5
V
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = Bulk pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Description
LO566TWN1-70G-A1-00001
5mm Oval 70 White, FULL RANK, Bulk Pack
LO566TWN1-70G-A1-00002
5mm Oval 70 White, A1, A2, B1, B2, Bulk Pack
LO566TWN1-70G-A1-00003
5mm Oval 70 White, A2, B1, B2, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT103.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps