Cree® SMD LED Model # LP6-PWN1-03-N1 Data Sheet 120-degree, 6.0 x 5.0 mm, SMT LED in white color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 3 X 50 mA IFP 3 x 100 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 255 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 3 x 300 °C/W RTHJS 3 x 160 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥40 mm2) D-CT161.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Forward Voltage VF IF = 3 x 50 mA V Reverse Current IR VR = 5 V μA Luminous Intensity IV IF = 3 x 50 mA mcd Luminous Flux θV IF = 3 x 50 mA mlm Chromaticity Coordinates x IF = 3 x 50 mA y IF = 3 x 50 mA 2θ½ IF = 3 x 50 mA 50% Power Angle Unit Minimum Typical Maximum 4.0 5.1 10 2240 3500 9000 0.31 0.32 deg Subject to change without notice. www.cree.com/ledlamps 120 Standard Bins for LP6-PWN1-03-N1 (IF = 3 x 50 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LP6-PWN1-03-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 50 mA. Luminous Intensity (IV) A1 A2 B1 B2 c 5600 mcd Z1 4500 mcd Y2 3550 mcd Y1 2800 mcd X2 2240 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y A1 A2 0.245 0.264 0.280 0.264 0.264 0.283 0.296 0.280 0.283 0.307 0.313 0.296 0.229 0.267 0.248 0.220 0.267 0.305 0.276 0.248 0.305 0.337 0.297 0.276 Rank Chromaticity x Coordinates y B1 B2 c 0.307 0.330 0.330 0.313 0.330 0.361 0.356 0.330 0.337 0.360 0.318 0.297 0.360 0.385 0.351 0.318 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the color coordinates is ±0.01. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT161.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram CIE CIE Chromaticity Diagram 0.90 520 530 0.80 540 510 550 0.70 560 0.60 570 490 0.50 Y 580 590 0.40 600 c 610 620 630 B2 0.30 B1 480 A2 A1 0.20 470 0.10 460 0.00 0.00 0.10 0.20 0.30 4/5 X 0.40 0.50 0.60 CLD-CT161.000 0.80 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 0.70 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. SPE/LP6-PWN1-03-N1 05 Graphs Graphs 100.0 If (mA) -50 -40 -30 -20 -10 0 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 Vf(V) 0.0 3.0 3.4 3.8 4.2 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. 5.0 4.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Half Power WL=150nm 2.5 100% 2.0 75% 1.5 50% 1.0 25% 0.5 If(mA) 0.0 0.0 0% 80.0 100.0 20.0 40.0 60.0 400 500 600 700 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 100 -50.0 50% Power Angle : IF(mA) Ie(%) 0 80 100% Rth j-s=160 C/W 60 80% 60% 40 40% 20 0 20% Rth j-a=300C/W 0 20 40 60 T ( C) 80 -90 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Prepared by Signatures WangFJ -30 0 30 60 0% Revision History Rev.No Date Change Description Change VF(avg) from 4.0V to 4.5V,VF(max) from 4.6V to 5.1V; PD from 3X230 mW to 3X255 mW; Change Graphs. Checked by XieJH 2007-04-26 03 2005-11-02 Approved by DavidLiu 2007-04-26 04 2007-01-10 Change VF(typ)4.5 to 4.0 05 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01 FCN# FCN20070103 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 International Ltd. Copyright © 2007 Cree, Inc.Cotco All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 90 FIG.6 FAR FIELD PATTERN Date 2007-04-26 -60 CLD-CT161.000 5/5 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Document No. Rev. No. SPE/LP6-PWN1-03-N1 05 Dimension Drawing Mechanical Dimensions All dimensions are in mm. = 25°C Absolute maximum Rating Unit 3 x 50 mA 3 x 100 mA 5 V 3 x 255 mW -40 ~ + 100 °C -40 ~ + 100 °C +110 °C 3 x 300 °C /W 3 x 160 °C /W 2 ** Rth test condition: Mounted on PC Board FR 4(pad size>=40mm ) cteristics ( Ta = 25°C) Condition Min. Typ. Max. Unit --- 4.0 5.1 V VR = 5V --- --- 10 PA IF = 3 x 50mA --- 9000 --- mlm IF = 3 x 50mA --- 0.31 --- --- IF = 3 x 50mA --- 0.32 --- --- IF = 3 x 50mA --- 120 --- deg Notes IF = 3 x 50mA RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the limits) permitted in accordance with EU DirecIF =threshold 3 x 50mA mcd 2240 for such substances, 3500 or are used---in an exempted application, tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT161.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LP6-PWN1-03-N1-00001 SMD 120 White, FULL RANK, Tape & Reel LP6-PWN1-03-N1-00002 SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT161.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps