Cree® SMD LED Model # LP6-EWN1-03-N3 Data Sheet 120-degree, 6.0 x 5.0 mm, SMT LED in white color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 3 x 50 mA IFP 3 x 100 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 240 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 3 x 300 °C/W RTHJS 3 x 160 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥40 mm2) D-CT167.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Forward Voltage VF IF = 3 x 50 mA V Reverse Current IR VR = 5 V μA Luminous Intensity IV IF = 3 x 50 mA mcd ФV IF = 3 x 50 mA mlm x IF = 3 x 50 mA 0.31 y IF = 3 x 50 mA 0.32 2θ½ IF = 3 x 50 mA Luminous Flux Chromaticity Coordinates 50% Power Angle Unit Minimum deg Subject to change without notice. www.cree.com/ledlamps Typical Maximum 3.8 4.8 10 7100 10000 27000 120 Standard Bins for LP6-EWN1-03-N3 (IF = 3 x 50 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LP6-EWN1-03-N3 may be filled with any or all bins contained as below. Luminous Intensity (IV) & Flux (lm) All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 50 mA. A1 A2 B1 B2 c Z6 or above 14000 mcd (42 lm) Z5(V) 11200 mcd (29 lm) Z4(U) 9000 mcd (23 lm) Z3(T) 7100 mcd (18 lm) Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y A1 A2 0.264 0.280 0.264 0.264 0.283 0.296 0.280 0.283 0.307 0.313 0.296 0.229 0.267 0.248 0.220 0.267 0.305 0.276 0.248 0.305 0.337 0.297 0.276 Rank Chromaticity x Coordinates y B1 0.245 B2 c 0.307 0.330 0.330 0.313 0.330 0.361 0.356 0.330 0.337 0.360 0.318 0.297 0.360 0.385 0.351 0.318 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the color coordinates is ±0.01. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. 8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the interior of the device, which can be damaged by excessive force to the SMD surface. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT167.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram CIE CIE Chromaticity Diagram 0.90 520 530 0.80 540 510 550 0.70 560 0.60 570 490 0.50 Y 580 590 0.40 600 c 610 620 630 B2 0.30 B1 480 A2 A1 0.20 470 0.10 460 0.00 0.00 0.10 0.20 0.30 4/5 X 0.40 0.50 0.60 CLD-CT167.000 0.80 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 0.70 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. Graphs SPE/LP6-EWN1-03-N3 02 Graphs If (mA) 100.0 -50 -40 -30 -20 -10 0 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 0.0 -40.0 Vf(V) 3.0 3.4 3.8 4.2 4.6 5.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Half Power WL=150nm 2.5 100% 2.0 75% 1.5 50% 1.0 25% 0.5 If(mA) 0.0 0.0 0% 80.0 100.0 20.0 40.0 60.0 400 600 500 700 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 100 -50.0 50% Power Angle : IF(mA) Ie(%) 0 80 100% Rth j-s=160 C/W 60 80% 60% 40 40% 20 0 20% Rth j-a=300C/W 0 20 40 60 T ( C) 80 -90 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS Signatures Date 0 30 60 WangFJ 2007-05-08 Rev.No Checked by XieJH 2007-05-08 02 Approved by DavidLiu 2007-05-08 Date 0% Change Description 2007-05-08 Change Dimension Drawing FCN20070120 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco Ltd. Copyright © 2007 Cree, Inc. All rights International reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 90 Revision History Prepared by FCN# -30 FIG.6 FAR FIELD PATTERN TEMPERATURE. DERATING BASED ON Tjmax=110 C Items -60 CLD-CT167.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions Document No. Rev. No. SPE/LP6-EWN1-03-N3 02 Dimension Drawing All dimensions are in mm. cations ngs at Ta = 25°C in Absolute maximum ymbol Rating Unit IF 3 x 50 mA IFP 3 x 100 mA VR 5 V PD 3 x 240 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 3 x 300 °C /W Rth JS 3 x 160 °C /W 2 ty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=40mm ) ical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 3 x 50mA --- 3.8 4.8 V VR = 5V --- --- 10 PA IF =3 x 50mA --- 27000 --- mlm IR ĭV IV x y Notes RoHS Compliance IF = 3 x 50mA mcd 7100sensitive, persistent 10000 --- toxic (PBT), persistent organic pollutants (POP), or The levels of environmentally biologically otherwise restricted materials in this product are below the maximum concentration values (also referred to as the IF = 3 x 50mA 0.31 or are used ---in an exempted ---application, in accordance with EU Directhreshold limits) permitted --for such substances, tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), --- April 21, 2006. 0.32 ----x 50mA through I =as3 amended F 2 T½ VisionIFAdvisory = 3 x 50mA Claim --- 120 --- deg Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT167.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LP6-EWN1-03-N3-00001 SMD 120 White, FULL RANK, Tape & Reel LP6-EWN1-03-N3-00002 SMD 120 White, A1, A2, B1, B2, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT167.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps