3mm, Flat Top LED CBI® Circuit Board Indicator In-line, 3 Leaded Bi-Color 4.83 [.190] 9.65 [.380] 3.80 [.150] 551-3508 PART NO. COLOR 551-3508 Red/Green 3.09 [.122] 7.11 [.280] 3.81 [.150] 1.78 [.070] GREEN ANODE 2.54 [.100] .608 [.020] STABILIZER PIN 2.03 [.080] 1.70 [.067] RECOMMENDED P.C. BOARD LAYOUT 2.54 [.100] 1.90 1.90 [.075] [.075] COMMON CATHODE 1.60 [.063] 1.09 [.043] 2.54 1.90 1.90 [.100] [.075] [.075] Dimensions in mm [inches] 4 Features • Common Cathode simplifies design, and provides amber as a third color • Locating pin provides stability during soldering • Multiple CBIs form horizontal LED arrays on 4.2mm (0.1650”) center-lines • High Contrast, UL 94 V-0 rated, black housing • • • • • Oxygen index: 31.5% Polymer content: PBT, 1.055 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information See page 4-70 and 4-71 for Reference Only LED Drive Circuit Examples. See page 4-72 for Pin Out Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) LED Data sheet Page # 551-3508 Red/Green 630/560 4/4 2/2.1 20 3TF-9484 4-69 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-21 3mm LED Bi-Color Non-Tinted, Diffused 3TD-9664, 3TD-986x, 3TF-9484 TYPE *3TD-9664 *3TD-9868 *3TD-9869 *3TF-9484 * NOT A VALID PART NUMBER. THIS SHEET IS FOR REFERENCE ONLY. COLOR Red/Green Red/Green Yellow/Green Red/Green Red/Green Red/Green Yellow/Green Red/Green ABSOLUTE MAXIMUM RATINGS (TA=25°C) -9664 -9868 -9869 -9484 Power Dissipation (mW) 75/75 100/100 60/100 75/75 Forward Current (mA) Derating (mW/°C) From 25°C *Derating (mA/ °C) From 50°C .85/.85 30/30 .4*/.4* 20/30 .25*/.4* 30/30 .33*/.67* Peak Current (mA) 100/100 30/30 80/120 100/100 Operating Temperature (°C) -30/+85 -55/+100 -55/+100 -30/+85 Storage Temperature (°C) -30/+100 -55/+100 -55/+100 -30/+100 Pulse width 10µs Soldering Temperature 260°C, 6 seconds, 1.6 mm from case (9484 only) 260°C, 5 seconds, 1.6 mm from case (except 9484) Solder Adherence per MIL-STD-202E, Method 208C Red/Green Red/Green Yellow/Green Red/Green -9664 -9868 -9869 -9484 OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=20mA *IF=10mA Min. Typical 4/6 8/12 2.5*/3.7* 4.7*/10* 2.5*/2.5* 4.3*/6.3* 2/2 4/4 Peak Wavelength (nm) λ Peak Typical 630/560 635/565 585/565 630/560 Viewing Angle (2Θ½) Typical 80° 60°/60° 80°/80° Forward Voltage (V) Typical 2/2.1 2/2.1 2.1/2.1 2/2.1 IF=20mA Reverse Voltage (V) Max. 2.5/2.5 2.8/2.8 2.8/2.8 2.5/2.5 Min. 5 5 5 5 IR=100µA Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-69 4