2mm LED CBI® Circuit Board Indicator (DIN 41494 Compatible), Tri-Level 570-0100-xxx PART NO. 1.52 [.060] 5.08 [.200] COLOR* 570-0100-111 570-0100-132 570-0100-222 570-0100-333 12.85 [.506] 1.80 [.071] 3.30 [.130] 10.16 [.400] 3.30 [.130] Red–Red–Red Red–Yellow–Green Green–Green–Green Yellow–Yellow–Yellow * Top-Middle-Bottom LED 1.78 [.070] .41 [.016] SQ. ANODE 3.20 [.126] 3 0.46 [.018] 6.84 [.269] .4 [.017] REF 2.54 [.100] 2.54 [.100] Ø 0.965 ±.05 [.038±.002] 2.54 [.100] TOP LED 2.54 [.100] RECOMMENDED P.C. BOARD LAYOUT 2.54 [.100] Dimensions in mm [inches] Features Custom Combinations • Designed to accommodate DIN 41494 • Multiple CBIs form horizontal LED arrays on 5.08mm • Contact factory for information on custom color combinations. • • • • (0.200”) center-lines High Contrast, UL 94 V-0 rated, black housing Oxygen index: 29% Polymer content: PBT, 0.595 g Housing stand-offs facilitate PCB cleaning EXAMPLE OF PART NUMBER ORDERING CODE Series Top LED Color 570-0100-xxx • Solderability per MIL-STD-202F, method 208F • LEDs are safe for direct viewing per IEC 825-1, EN- 60825-1 Middle LED Color Bottom LED Color LED colors: 0) Blank 1) Red 2) Green 3) Yellow Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] See LED data sheet for additional information See Page 3-17 and 3-18 for Reference Only LED Drive Circuit Examples See Page 3-19 for Pin Out Typical Operating Characteristics (TA = 25°C) GENERAL PURPOSE Part Number 570-0100-xxx * I F = 10 mA Color Peak Wavelength nm IV* mcd V F ** Volts Viewing Angle 2Θ Θ1/2 LED Data sheet Red 635 12.6 2 38° 521-9630 3-13 Green Yellow 565 585 8.7 12.6 2.1 2.1 38° 38° 521-9632 521-9631 3-13 3-13 Page # **I F = 20 mA Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 3-11 2mm Discrete LED Diffused 521-9630, -9631, -9632 CATHODE I.D. 2.40 [.095] 2.90 [.114] 25.40 [1.00] MIN CATHODE 3.30 [.13] .45 [.018] TYP 1.80 [.071] R 1.65 [.065] 1.52 [.060] .40 [.016] TYP 1.00 [.04] MIN 2.54 [.10] NOM PART NO. 521-9630 521-9631 521-9632 COLOR Red Yellow Green 1.50 [.059] MAX 3.30 [.130] 3 Dimensions in mm [inches] Red Yellow Green -9630 -9631 -9632 Power Dissipation (mW) 100 60 100 Forward Current (mA) 30 20 30 .4 .25 .4 120 80 120 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Derating (mA/°C) From 25°C Peak Current (mA) Pulse width = 10µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Red Yellow Green OPERATING CHARACTERISTICS (TA=25°C) -9630 -9631 -9632 Luminous Intensity (mcd) IF=10mA Min. Typical 3.7 12.6 3.7 12.6 2.5 8.7 Peak Wavelength (nm) λ Peak Typical 635 585 565 Viewing Angle (2Θ Θ1/2) Typical 38° 38° 38° Forward Voltage (V) IF=20mA Typical Max. 2 2.8 2.1 2.8 2.1 2.8 Reverse Voltage (V), IR=100µA Min. 5 5 5 Θ 1¼2is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 3-13