DATE : 2005. 01. 17. SPECIFICATION PRODUCT : MODEL : REMOCON MODULE 346HF12A OPTO ELECTRONICS CO., LTD. 1066-12 YOUNJANG-RI, JINAN-UP, JINAN-GUN JEON-BUK, KOREA. TEL : (063) 433-4566∼8 FAX : (063) 433-4569 E mail : [email protected] A P P R O V A L S H E E T PAGE 1/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) 1. Application This approval sheet applies to the review and approval for the remocon module 346HF12A of color TV, etc... 2.Generanl Description 2-1. The supplier who wants to change the components, structure, material, location, and process needs to be reapprovaled. 2-2. Quality guarantee is depended on Component Quality Guarantee Contract. 3. Dimension and Expression 3-1. Dimension and expression Refer to the drawing. 3-2. Expression ( MARKING SPEC' ) Refer to the drawing. 4. Material list NO. Parts Name Specification Quantity Source Vendor MYUNG SUNG 1 I . C T2526N338 1 ATMEL 2 PHOTO DIODE SD-202 1 AUK 3 LEAD FRAME LF-3A 1 HYUNDAI G.G 4 MOLD CUP RM-H1 DONG SUNG 5 CASTING RESIN DC-5280 DAEJOO F.C 6 CASTING RESIN DH-5280 DAEJOO F.C Remark A P P R O V A L S H E E T PAGE 2/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application NO. 7 Parts Name CASE UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( Specification Quantity Source 1 KEO SUNG RC-H5(P) ) Vendor Remark * Enter the name of the second manufacture corporation, do not enter the name of the first manufacture corporation when there is no another corporation. 5. Absolute Maximum Ratings Characteristics Value Supply Voltage 6.0 VRMS Supply Current - mARMS Operating Temperature -20℃ ∼ +70℃ Storage Temperature -40℃ ∼ +85℃ Remarks 6. Electro-Optical Characteristics ( It is tested on condition at 25℃±2℃, humid 60∼70%.) Specification Characteristics Unit Symbol MIN Supply Voltage Vcc Consumption current Icc TYP 2.7 1.2 Condition MAX 5.5 Vrms 2.0 mArms No input signal A P P R O V A L S H E E T PAGE 3/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( Characteristics High Level Output Voltage Low Level Output Voltage High Level Pulse Width Low Level Pulse Width BPF Center Frequency Peak Wave Length Arrival Distance ) Specification SYMBOL L Operation Angle CONDITION MIN TYPE MAX VH Vcc-0.2 Vcc - Vo-P * 1 VL - 0.2 0.4 Vo-P * 1 TWH 400 - 800 ㎲ * 2 TWL 400 - 800 ㎲ * 2 Fo - 38 - ㎑ P - 940 - ㎚ 2.7V 3.0V 4.0V 5.0V 2.5 85 75 15 20 25 25 25 - - m m m m m ˚ ˚ 5.5V 2 m 5 m * 3 * 4 * 1 : Depart 30cm from a receiving lense. * 2 : The standard transmitter shall be specified of the burst wave form in the FIG 1 adjusted to Vout 50mVp-p upon Po measuring circuit FIG 2. FIG 1) Output Waveform Transmitter Output Waveform Vout LEVEL (50mVp-p) (600)㎲ (600)㎲ Remocon Module Output Waveform VH VL GND Twl Twh A P P R O V A L S H E E T PAGE 4/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) FIG 2) standard transmitter and measuring method - The standard transmitter which applies a IR-LED CL-1L5R is TM32. …(Projection of IR-LED is - 0.1 ∼ + 0.2mm) - The standard transmitter supplies to the DC 3V not battery but power supply. 10K 5V IR LED : CL-1L5R 100K OSCILLOSCOPE DUT *3 *4 DUT 75˚ 85˚ L 2m 5m - Vcc supplies to the set power - DUT : Device Under Test ( 70Cm height from ground ) Output Vcc GND A P P R O V A L S H E E T PAGE 5/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) 7. SCHEMATIC DIAGRAM AND PATTERN DRAWING Vcc Input CGA&FILTER Demodulator Out P/D Gnd Oscillator AGC/ATC & Digitial Control 8. The Others In case of noisy power supply, please serially insert about 47ohm resistance and about 47uF Electrolytic capacitance in Vcc line as follows. Output 1 47ohm 346HF12A Vcc 2 47uF 3 GND A P P R O V A L S H E E T PAGE 6/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) 9. Mechanical Characteristic Measured on usual condition and it means room temperature 25℃ ±2℃ and humidity 60~70%. Items Test Condition Terminal Intensity Keep the weight 500g for 30 second No destruction Bend 90 with wight 250 two times - Not depart the kapa plate. - Not cut the lead Terminal Bend Intensity Drop Test Jugement each terminals Test piece is dropped three times from the height 1m on floor. Vibration Test Frequency 10-55-10㎐ Amplitude 1.5mm Direction No effect on suface structure and electric features (except the lead bent) No destruction x, y, t During 6 hours each x, y, z directions Soldering Heat Test Soldering Ability Test Put the lead into the lead over 4 ±1mm for 3 ±0.5 second Content the electric feature on usual condition for 1hour Put the lead into the lead pot 4 ±1mm for 3 ±0.5 second The new lead should attach over 95% A P P R O V A L S H E E T PAGE 7/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) 10. Reliability test Items High humid test Test Condition Leave it on condition 40℃, humid 90~95% RH, 96 HR ± 4 HR High temperture Leave it on condition 85℃, test 96 HR ± 12 HR Low temperture Leave it on condition -30℃ test 500 HR ± 12 HR Heat shock test Judgement Operating distance and angle should be satisfied ″ ″ Test 20 cycle as 1 cycle that leave it on condition -20℃ ″ and +70℃ for 2hours load life test Satisfing Vcc=5V, leave it on 70℃ high temp. for 240 hours PCT test ″ Leave it on condition 123℃, 95% RH, 1atm for 96 hours ″ - Judge the result after reliability test and let alone during 1 hours. 11. Transient Change It should keep the origin appearance and soldering conditions after 6months on condition packing in space. A P P R O V A L S H E E T PAGE 8/8 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) 12. Packing It is should be packed against from shock and demage under delivery and storage and marked the minimal items at suitable space. 1) Parts Name 2) CODE No. 3) Specification 4) Quantity 5) Manufacturing Date 6) The Term of Storage 7) The Name of Corporation * Attach the packing drawing and material list 13. Manufaturing Process Flow Chart 14. Others - MARKING SPEC' - Product Outline Drawing - Measuring DATA - Reliability DATA A P P R O V A L S H E E T PAGE 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) PACKING SPECIFICATIONS [ IN BOX ] QUANTITY(pcs) WEIGHT(g) BOX NAME LOADING UNIT COMPRESSIBILITY(kg) 775 0.75 IB-100 5 1 → BOX SIZE → PACKING METHOD 302 72 202 [ OUT BOX ] QUANTITY(pcs) WEIGHT(kg) BOX NAME LOADING UNIT COMPRESSIBILITY(kg) 6,200(775×8) 8 OB-57 8 9 → BOX SIZE - MARKING ON THE BOX 1) PRODUCT NAME 2) TYPE NUMBER 3) QUANTITY 320 4) DATE OF STORED 5) LOT NUMBER 6) QUALITY QUARANTEED 7) MANUFACTURE'S NAME 422 320 Unit : mm Tolerance : ±1.0 A P P R O V A L S H E E T PAGE 2005. 01. 17. PARTS NAME T I T L E 346HF12A REMOCON - MODULE CODE NO. Application UL, CSA, JMI, VDE, BSI, SEMKO, DEMKO, ( ) MARKING SPECIFICATIONS 3G15 MARKING POSITION [ BOTTOM VIEW ] 3 G 15 < Day > < Month > < Year > EX) 03년 7월 15일