Crystal oscillator SIP LOW/MEDIUM-FREQUENCY CRYSTAL OSCILLATOR SG-10 Products number Q31 1 0 0 0 0 x x x x x 0 0 • • • • Low current consumption. Small suited to high-density mounting. Mountable on a standard printed circuit board. Cylindrical low/medium-frequency crystal unit builtin, thus assuring high reliability. Actual size Specifications (characteristics) Item Output frequency range Power source voltage Max. supply voltage Symbol Specifications Remarks f0 10.0000 Hz to 153.6000 kHz For output frequency, see the table below VDD-GND -0.3 V to +7.0 V Operating voltage VDD 4.5 V to 5.5 V Storage temperature Operating temperature TSTG -55 °C to +125 °C TOPR -10 °C to +70 °C ∆f/f0 A: ±10 x 10-6 B: ±50 x 10-6 VDD=5 V Ta=+25 °C Frequency temperature characteristics +10 x 10 / -120 x 10 -10 °C to +70 °C, taking Ta=+25 °C as the reference Frequency voltage characteristics ±10 x 10-6 Max. Temperature range Frequency tolerance -6 Stored as bare product after unpacking -6 Current consumption lOP 0.5 mA Max.. No load condition Duty tW/t 40 % to 60 % (except for cases of 1/3 and 1/ 5 divided frequency.) 1/2 VDD or 1.4 V level VOH VDD -1.0 V Min. IOH= -40 µA Output voltage VOL 0.4 V Max. IOL=1.6 mA Output load condition (fan out) N/CL 1 TTL Max./15 pF Max. TTL load/C-MOS load Output rise time tTLH 60 ns Max. Output fall time tTHL 50 ns Max. Oscillation start up time tOSC 1 s Max. fa ±5 x 10-6/year Max. Ta=+25 °C ±3 °C, VDD=5 V, first year S.R. ±5 x 10-6 Max. Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2 sine wave in 3 directions For more than 1 ms until VDD=0 V→4.5 V. Aging Shock resistance Time at 4.5 V to be 0 s Unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition. External dimensions (Unit: mm) 4.6 Max. Oscillation source (7.5) E SG-10 B 32.768 kHz 0131A 31 153.600 kHz Oscillation source frequency x (any arbitrary one of 1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/12) x (any arbitrary one of 1/1, 1/10, 1/100, 1/1000). Over 10.0 Hz range. For frequencies other than the above, please consult us. (Min. order lot 10000 pcs.) 0.5 7.0 0.25 Divided frequency output (calculation method) 32.768 kHz,60.000 kHz, 96.000 kHz, 100.000 kHz, Output frequency example (1.3) 8.8 Max. 16.0 Max. Output frequency table 2.1 #1 #2 2.54 2.54 #3 NO. Pin terminal 1 2 3 Oscillation source 32.768 kHz , 60.000 kHz 100.000 kHz ,153.600 kHz Divided frequency 10.000 Hz, 50.000 Hz, 100.000 Hz, 1.000 kHz, 4.800 kHz , 9.600 kHz, 19.200 kHz , 38.400 kHz, 50.000 kHz , 76.800 kHz GND OUT VDD , 96.000 kHz,