EMM5206LP K Band Oscillator MMIC FEATURES ・High Output Power : Pout=5dBm @Vdd=4V (typ.) ・Low Power Consumption : Idd=20mA @Vdd=4V (typ.) ・Low Phase Noise : Φn=-100dBc/Hz @100KHz offset, fosc=24GHz ・Low Spurious Level : RJ2nd<-40dBc ・High Reliability, High Breakdown Voltage : Vgdo=20V, Igdo=160uA DESCRIPTION The ES/EMM5206LP is a negative resistance MMIC designed for K-band doppler sensor application as an oscillator. This product is well suited for radiowave sensor and LMDS applications. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING Item DC Drain Voltage Storage Temperature Operating Case Temperature Symbol Vdd Tstg Rating 6 -55 to +125 TC -40 to +85 RECOMMENDED OPERATING CONDITIONS Item Symbol DC Drain Voltage Vdd DC Gate Voltage Vgg Unit V Condition 4 0 o C o C Unit V V Recommended operating conditions provide typical electrical characteristics and high reliability. o ELECTRICAL CHARACTERISTICS (Case Temperature Tc=25 C) Item Oscillation frequency Output Power Phase Noise at 100KHz offset Drain Current 2nd Harmonic Rejection Pushing Temperature Sencitivity Symbol fosc Pout Φn Idd RJ2nd ∆fv ∆ft Test Conditions Vdd=+4.0V typ. Vgg=0V(GND) fosc=24.0GHz Class 1 ESD Note : Based on EIAJ ED-4701 C-111A(C=100pF, R=1.5kΩ) LP CASE STYLE Edition 4.0 August 2005 1 Min. 15 - Limits Typ. 5 -100 20 -40 5.7 0.2 200 ~ 499V Max. 24.5 - Unit GHz dBm dBc mA dBc MHz/V o MHz/ C EMM5206LP K Band Oscillator MMIC Oscillation Spectrum Phase Noise Vdd=4V, Vgg=0V, Idd=21mA 24.003 0 23.999 23.997 fosc -20 23.995 -30 -40 23.991 -50 23.989 1 Edition 4.0 August 2005 2 3 Vdd[V] 4 fosc 4 24.01 24.005 2 23.993 P2nd 24.015 6 24.001 Posc -10 24.02 Posc Po sc [dBm ] 10 8 24.005 Idd 20 Vdd=4V, Vgg=0V f o sc [GH z] I dd[mA ],Po sc [dB m], P2 n d[dB m] 30 Posc, fosc vs. Temperature Vgg=0V 0 24 -20 5 0 20 40 Temp[℃] 2 60 80 f o sc [G Hz ] Idd, Posc, P2nd,fosc vs. Vdd fosc=24GHz, offset=100KHz EMM5206LP K Band Oscillator MMIC ■Board Layout ( Substrate : RO4003C, εr=3.38, t=0.5mm DR : DRD02600115R00Z00T ) MMIC DR 50ohm output 33pF Vdd ■Package Outline PIN ASSIGNMENT 1: VGG 2: GND 3: VDD 4: GND Edition 4.0 August 2005 Unit: mm 3 EMM5206LP K Band Oscillator MMIC Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: ・Do not put these products into the mouth. ・Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these byproducts are dangerous to the human body if inhaled, ingested, or swallowed. ・Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Inc. reserves the right to change products and specifications without notice.The information does not convey any license under rights of Eudyna Devices Inc. or others. Eudyna Devices Asia Pte. Ltd. Hong Kong Branch Rm.1101,Ocean Centre, 5 Canton Road Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL +81-45-853-8156 FAX +81-45-853-8170 Edition 4.0 August 2005 4