EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Features ․P-LCC-2 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Brilliant Yellow Green Water Clear Material AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 1 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Package Dimensions CL 2.2±0.1 2.9±0.2 CL - + 3.25±0.2 Polarity 2.9±0.2 For reflow soldering (propose) Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 2 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current(Duty 1/10 @ 1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (Ta=25℃) : Parameter Luminous Intensity Symbol Iv Rank Min. Typ. Max. E3 105 ----- 285 E4 140 ----- 450 E5 175 ----- 565 Unit Condition mcd IF=20mA Viewing Angle 2θ1/2 ----- ----- 60 ----- deg IF=20mA Peak Wavelength λp ----- ----- 575 ----- nm IF=20mA Dominant Wavelength λd ----- 567.5 ----- 577.5 nm IF=20mA △λ ----- ----- 20 ----- nm IF=20mA Forward Voltage VF ----- 1.7 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- ----- 10 μA VR=5V Spectrum Radiation Bandwidth Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 3 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 4 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 5 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. + Polarity Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Desiccant Rev. 2 Label Page: 6 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 7 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 8 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng,Test TaipeiItems 236, Taiwan, Reliability AndR.O.C Conditions Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-67B-013 prepared date:29-June-2007 Rev. 2 Page: 9 of 9 Prepared by: Ray Yuan