EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens (Preliminary) 67-11B/T7C-MX1Y2M/BT Features ․PLCC-2 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Material Emitted Color InGaN Pure White Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Water Clear Rev. 1 Page: 1 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Package Dimensions CL 2.2±0.1 2.8±0.2 CL - + 3.25±0.2 Polarity 3.0 For reflow soldering (propose) Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 2 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Electrostatic Discharge (HBM) ESD 2000 V Power Dissipation Pd 110 mW IFP 100 mA Peak Forward Current(Duty 1/10 @ 1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (Ta=25℃) : Parameter Luminous Intensity Symbol Min. 1800 Iv Typ. Max. Unit Condition ----- 3600 mcd IF=20mA Viewing Angle 2θ1/2 ----- 60 ----- deg IF=20mA Forward Voltage VF 2.75 ----- 3.95 V IF=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 3 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Bin Range Of Dom. Wavelength Groups Min Max X1 1800 2250 X2 2250 2850 Y1 2850 3600 Y2 3600 4500 Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range Of Forward Voltage Groups M Bin Min Max 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 8 3.65 3.95 Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 4 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Chromaticity Coordinates Specifications for Bin Grading Group Bin Code B5-1 B5-2 M A0-1 A0-2 CIE_x CIE_y 0.291 0.287 0.297 0.300 0.300 0.297 0.307 0.309 0.272 0.264 0.276 0.282 0.282 0.276 0.287 0.292 0.286 0.295 0.305 0.295 0.295 0.305 0.315 0.305 0.258 0.267 0.281 0.272 0.272 0.281 0.295 0.286 Bin Code B5-3 B5-4 A0-3 A0-4 CIE_x CIE_y 0.296 0.292 0.300 0.304 0.304 0.300 0.309 0.311 0.280 0.272 0.282 0.288 0.288 0.282 0.292 0.296 0.276 0.286 0.295 0.285 0.285 0.295 0.305 0.294 0.248 0.258 0.272 0.262 0.262 0.272 0.286 0.276 0.32 0.31 B5-2 0.30 B5-4 B5-1 0.29 B5-3 A0-2 y 0.28 A0-4 0.27 A0-1 0.26 A0-3 0.25 0.24 0.26 0.27 0.28 0.29 0.30 0.31 x Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 5 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 6 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 7 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. + Polarity Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Desiccant Rev. 1 Label Page: 8 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 9 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 10 of 10 Prepared by:Rita Shen EVERLIGHTELECTRONICS CO.,LTD. 67-11B/T7C-MX1Y2M/BT 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com prepared date:28-Apr-2006 Rev. 1 Page: 11 of 10 Prepared by:Rita Shen