EVERLIGHT ELECTRONICS CO., LTD Technical Data Sheet High Performance with Reflector LEDs 94-22UBC/C430 Features： z White package. z Dual-chip, wide-angle, low-profile LEDs . z Excellent chip to chip consistency z Super Intensity z High performance z Pb-free z The product itself will remain within RoHS compliant version. Applications： z Automotive: backlighting in dashboard and switch. z Telecommunication: indicator and backlighting in telephone and fax. z Indicator and backlight for audio and video equipment. z Indicator and backlight for battery driven equipment. z Display Screen Illumination on Portable Handheld Devices z Indicator and backlight in office equipment. z General use. Device Selection Guide Chip Lens Color Material Emitted Color GaN/SiC Blue Everlight Electronics Co., Ltd. Device No. : DSE-942-017 http://www.everlight.com Prepared date: 22-Sep-2005 Water Clear Rev. 2 Page: 1 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22UBC/C430 Package Dimensions Notes: All dimensions are in millimeters. Tolerances unspecified are±0.1mm. Everlight Electronics Co., Ltd. Device No. : DSE-942-017 http://www.everlight.com Prepared date: 22-Sep-2005 Rev. 2 Page: 2 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22UBC/C430 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) ESD 1000 V Power Dissipation Pd 130 mW Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 70 mA Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous intensity Iv 35 45 ----- mcd IF=20mA Viewing Angle 2θ1/2 ----- 130 ----- deg IF=20mA Peak Wavelength λp ----- 428 ----- nm IF=20mA Dominant Wavelength λd ----- 466 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 65 ----- nm IF=20mA Forward Voltage VF ----- 7.6 9.0 V IF=20mA Reverse Current IR ----- ----- 10 uA VR=5V Everlight Electronics Co., Ltd. Device No. : DSE-942-017 http://www.everlight.com Prepared date: 22-Sep-2005 Rev. 2 Page: 3 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22UBC/C430 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-942-017 http://www.everlight.com Prepared date: 22-Sep-2005 Rev. 2 Page: 4 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22UBC/C430 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % Test Sample No. Items Test Condition Hours/Cycles Size Temp. : 260℃±5℃ 1 Soldering Heat 22 Pcs. 10 sec. 2 3 4 5 Ac/Re 0/1 Temperature Cycle H : +100℃ 15min. ∫ 5 min. L : -405℃ 15min. 300 Cycles 22 Pcs. 0/1 Thermal Shock H : +100℃ 5min. ∫ 10 sec. L : -10℃ 5min. 300 Cycles 22 Pcs. 0/1 Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1 High Temperature Storage Low Temperature Storage 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/R.H85% 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-942-017 http://www.everlight.com Prepared date: 22-Sep-2005 Rev. 2 Page: 5 of 6 Prepared by: Ray Yuan EVERLIGHT ELECTRONICS CO., LTD 94-22UBC/C430 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-942-017 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 22-Sep-2005 Rev. 2 Page: 6 of 6 Prepared by: Ray Yuan