EVERLIGHT ELECTRONICS CO., LTD Technical Data Sheet High Performance SMD LED with Reflector 94-22SURC/S530-XX Features z White package. z Dual-chip, wide-angle, low-profile LEDs. z Excellent chip to chip consistency z Super Intensity z High performance z Pb-free z The product itself will remain within RoHS compliant version. Applications z Telecommunication: indicator and backlighting in telephone and fax. z Indicator and backlight for audio and video equipment. z Indicator and backlight for battery driven equipment. z Display Screen Illumination on Portable Handheld Devices z Indicator and backlight in office equipment. z General use. Device Selection Guide Chip Lens Color Material Emitted Color AlGaInP Brilliant Red Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-081 Prepared date: 27-Nov-2006 Water Clear Rev. 3 Page: 1 of 6 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX Package Dimensions Notes: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-081 Prepared date: 27-Nov-2006 Rev. 3 Page: 2 of 6 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Luminous intensity Symbol IV *Chip Rank Min. Typ. A2 59 77 A3 95 106 A4 124 140 A5 155 170 Max. Unit Condition ----- mcd IF=20mA*1 Viewing Angle 2θ1/2 ----- ----- 130 ----- deg IF=20mA*1 Peak Wavelength λp ----- ----- 632 ----- nm IF=20mA*1 Dominant Wavelength λd ----- ----- 624 ----- nm IF=20mA*1 Spectrum Radiation Bandwidth △λ ----- ----- 20 ----- nm IF=20mA*1 Forward Voltage VF ----- ----- 4.0 4.8 V IF=20mA*1 Reverse Current IR ----- ----- ----- 10 μA VR=5V*1 *1.For each die 94-22SURC/S530-XX Chip Rank Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-081 Prepared date: 27-Nov-2006 Rev. 3 Page: 3 of 6 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-081 Prepared date: 27-Nov-2006 Rev. 3 Page: 4 of 6 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level : 90 % LTPD : 10 % No. Items Test Condition 1 Soldering Heat Temp. : 260℃±5℃ Test Hours/Cycles Sample Size Ac/Re H : +100℃ 15min. ∫ 5 min. L : -40℃ 15min. H : +100℃ 5min. ∫ 10 sec. L : -10℃ 5min. 10 sec. 22 Pcs. 0/1 300 Cycles 22 Pcs. 0/1 300 Cycles 22 Pcs. 0/1 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 Pcs. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 Pcs. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 Pcs. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 Pcs. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-081 Prepared date: 27-Nov-2006 Rev. 3 Page: 5 of 6 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD 94-22SURC/S530-XX Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-081 Prepared date: 27-Nov-2006 Rev. 3 Page: 6 of 6 Prepared by: Josh Chou