EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High performance SMD LED with Reflector 96-22UBC/C430 Features White package. Dual-chip, wide-angle, low-profile LEDs . Excellent chip to chip consistency Super Intensity Highperformance Pb-free. The product itself will remain within RoHS compliant version. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Indicator and backlight for audio and video equipment. Indicator and backlight for battery driven equipment. Display Screen Illumination on Portable Handheld Devices Indicator and backlight in office equipment. General use. Device Selection Guide Chip Material Emitted Color GaN/SiC Purplish Blue Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-962-022 prepared date: 19-Sep-2005 Lens Color Water Clear Rev. 1 Page: 1 of 6 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 96-22UBC/C430 Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-962-022 prepared date: 19-Sep-2005 Rev. 1 Page: 2 of 6 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 96-22UBC/C430 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Electrostatic Discharge(HBM) Tstg -40~ +100 ℃ ESD 1000 V Power Dissipation Pd 130 mW Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 70 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity IV Viewing Angle Min. Typ. Max. Unit Condition 16 20 ----- mcd IF=20mA 2θ1/2 ----- 145 ----- deg IF=20mA Peak Wavelength λp ----- 428 ----- nm IF=20mA Dominant Wavelength λd ----- 466 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 65 ----- nm IF=20mA Forward Voltage VF ----- 7.6 9.0 V IF=20mA Reverse Current IR ----- ----- 10 uA VR=5V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-962-022 prepared date: 19-Sep-2005 Rev. 1 Page: 3 of 6 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 96-22UBC/C430 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-962-022 prepared date: 19-Sep-2005 Rev. 1 Page: 4 of 6 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 96-22UBC/C430 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Soldering Heat Temp. : 260℃±5℃ Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-962-022 prepared date: 19-Sep-2005 10 Sec Rev. 1 Page: 5 of 6 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 96-22UBC/C430 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-962-022 prepared date: 19-Sep-2005 Rev. 1 Page: 6 of 6 Prepared by: Venis Wu