Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Features ‧Close responsively to the human eye spectrum ‧Light to Current, analog output ‧Good output linearity across wide illumination range ‧Low sensitivity variation across various light sources ‧Operating temperature performance, -40 C to 85 C ‧Wide supply voltage range, 2.5V to 5.5V ‧Size : 3.2mm(L)*1.5mm(W)*1.1mm(H) ‧RoHS compliant and Pb Free package o o Description ALS-PDIC15-21C/L230/TR8 Ambient Light Sensor Device, which incorporates a photodiode and a current amplifier IC in a single chip, is a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to human eyes. Applications ‧Detection of ambient light to control display backlighting Mobile devices – mobile phones, PDAs Computing device – TFT LCD monitor for Notebook computer Consumer device – TFT LCD TV, plasma TV, video camera, digital camera, toys ‧Automatic residential and commercial management ‧Automatic contrast enhancement for electronic signboard ‧Ambient light monitoring device for daylight and artificial light – Street light, CCD/CCTV Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 1 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Package Dimensions Top View Sensor Window 3 1 4 2 R0.35 1 2 3 4 4 3 Out Vcc GND GND 2 1.8 1 Bottom View Unit: mm Tolerances: ± 0.1mm Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 2 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Rating Unit Supply Voltage Vcc -0.5~6.0 V Output Voltage Vo 0 ~ Vcc-0.8 V Output Photo Current IPH 0~5 mA Operating Temperature Range Topr -40 ~ +85 ℃ Storage Temperature Range Tstg -40 ~ +100 ℃ Soldering Temperature Range [Note1] Tsol 260 ℃ Human Body Model ESD HBM 3000 V Machine Model ESD MM 300 V Note1: For detail reflow time and the recommended temperature profile, please refer to page 8. Recommended Operating Conditions (Ta=25℃ ℃) Parameter Symbol Min. Max. Unit Operating Temperature Topr -40 +85 ℃ Supply Voltage Vcc 2.5 5.5 V Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 3 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Electrical and Optical Characteristics (Ta=25℃ ℃) Parameter Symbol Min. Typ. Max. Unit Test Condition Supply Current Icc － 1.2*IPH － µA Dark Current ID － － 100 nA Vcc=3V or 5.5V; Ev= 0Lux IPH1 3.6 5.6 7.5 µA Vcc=3V; Ev=10Lux IPH2 36 56 75 µA Vcc=3V; Ev= 100Lux IPH3 － 68 － µA Vcc=3V; Ev= 100Lux IPH4 360 560 750 µA Vcc=3V; Ev=1000Lux Photocurrent Ratio IPH3 / IPH2 － 1.2 － － Saturation Output Voltage Vo 2.20 2.35 － V Peak Sensitivity Wavelength λp － 590 － nm Sensitivity Wavelength Range λ 390 --- 700 nm Rise Time tr － 0.356 － ms Fall Time tf － 1.11 － ms [Note1] [Fig.2] [Note1] [Fig.2] Light Current Switching Time Delay Time td － 2.2 － ms Storage Time ts － 0.692 － ms [Note2] [Fig.2] [Note1] [Fig.2] Vcc=3V; Ev= 100Lx, RL=75KΩ [Fig.3] Vcc=3V,RL=27KΩ [Fig.4] Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp. Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 4 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 ALS-PDIC15-21C/L230/TR8 5 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor Fig.1 ALS-PDIC15-21C/L230/TR8 Block Diagram PDIC15-21C 2.Vcc Vcc 2. Current Amp 1.Vout Vout 1. 3.GND GND 3. 4. 4.GND GND Fig.2 Measurement Method of Fig.3 Measurement Method of Light Current Saturation Output Voltage Light Source Vcc Vcc ICC Light Source Vout ALS-001 PDIC15-21C RL IL GND Fig.4 Vout ALS-001 AS-3021 PDIC15-21C GND Switching Time Measurement Method Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 6 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Typical Electrical and Optical Characteristics Curves Fig.5 Light Current vs. Illuminance Fig.6 Dark Current vs. Temperature 100000 Average dark current vs. Temperature Average dark current (nA) 10000 Vcc = 3V , Ev= 0 Lux 1000 100 10 1 0.1 0.01 1E-3 -60 -40 -20 0 20 40 60 ℃) 80 100 Temperature ( Fig.7 1.10 1.08 1.06 Light current vs. Temperature Fig.8 1.30 Relative light current vs. Temperature Vcc = 3V , Ev = 100 Lux 1.20 1.02 Relative light current Relative light current 1.00 0.98 0.96 0.94 0.92 0.90 0.88 0.86 1.15 1.10 1.05 1.00 0.95 0.84 -60 -40 -20 0 20 Temperature ( 40 ℃) 60 80 100 0.90 2.0 1.0 T a = 25 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Supply voltage (V) Spectral Response 1.2 Fig.10 ℃ Output voltage vs. Temperature 8 7 6 0.8 Output voltage (V) Relative sensitivity Relative light current vs. Supply voltage Ev = 100Lux 1.25 1.04 Fig.9 Light current vs. Supply Voltage 0.6 0.4 0.2 VCC = 3V EV = 100 Lux RL = 75KΩ 5 4 3 2 1 0.0 200 300 400 500 600 700 800 900 1000 1100 Wavelength (nm) 0 -60 -40 -20 0 20 40 ℃) 60 80 100 Temperature ( Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 7 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor Fig.11 ALS-PDIC15-21C/L230/TR8 Output Voltage vs. Illuminance ℃ 10 Ta = 25 Vcc = 3V Output voltage (V) 1 0.1 0.01 Fluorence light RL = 1 KΩ Fluorence light RL = 7.5 KΩ Fluorence light RL = 27 KΩ Fluorence light RL = 75 KΩ 1E-3 1E-4 1 10 100 1000 10000 Illuminance (Lux) Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 8 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Converting Photocurrent to Voltage Vcc Current Amp Iph Vout RL CL GND Note: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: Vout(max.) = Iout(max.) × RL ≦ Vout(saturation)＝Vcc－0.8V 3. To avoid 60Hz ripple from fluorescent lamps, we suggest that the time constant must be greater than 0.5 second: RL × CL ≧ 0.5 Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 (empirical data) 9 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Recommended method of storage Reflow Terms: JEDEC Level 4 Specification Dry box storage is recommended as soon as the aluminum bag has been opened prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: ℃ to 30℃ Storage temperature 10 Storage humidity ≦60%RH max After more than 72 hours under these conditions moisture content will be too high for Reflow soldering. In case of moisture absorption, the devices will recover to former condition by drying under the following condition: ℃ ℃/-0℃ and 5%RH (dry air / nitrogen), or 96 hours at 60℃+5℃ and < 5%RH for all device containers, or 24 hours at 125℃+5℃ not suitable for reel or tubes 192 hours at 40 +5 ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 10 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Soldering Iron ℃ for 3 Each terminal is to go to the tip of soldering iron temperature less than 350 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing. Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 11 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Packing Quantity Specification 2000 PCS/ 1 Reel Label Format xxxxxx xxxxxx RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Unit: mm Tolerance: ±0.1mm Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 12 http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Tape Dimensions Unit: mm Tolerance: ±0.1mm Moisture Resistant Packaging Label Label Aluminum moistue-proofbag bag Aluminum moisture-proof Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 13 Desiccant Desiccant Label Label http:\\www.everlight.com Dec. 01, 2007 Surface-Mount Ambient Light Sensor ALS-PDIC15-21C/L230/TR8 Note: 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. Everlight Electronics Co., Ltd. Document No: DAS-015-006 Rev3 14 http:\\www.everlight.com Dec. 01, 2007