5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Features ‧Excellent IR-Cut performance ‧Close responsively to the human eye spectrum ‧Light to Current, analog output ‧Good output linearity across wide illumination range ‧Low sensitivity variation across various light sources ‧Operation temperature performance, -40 C to 85 C ‧Wide supply voltage range, 1.8V to 5.5V ‧Size: 5mm Lamp (Flat lens) ‧RoHS compliant package o o Description The ALS-PDIC243-3B is an ambient light sensor, which incorporates a photodiode and a current amplifier IC in DIP package. EVERLIGHT ALS series products are a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to human eyes. Also, it is very suitable to use ALS product for opto-switch application. Applications ‧Ambient light monitoring device for daylight and artificial light – CCD camera/CCTV security equipment, Street light ‧Detection of ambient light to control display backlighting Computing device – TFT LCD monitor for Notebook computer Consumer device – TFT LCD TV, video camera, digital camera, toys Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 1 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.1mm Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 2 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Rating Unit Vcc -0.7~6.5 V Operating Temperature Range Topr -40 ~ +85 °C Storage Temperature Range Tstg -40 ~ +100 °C Soldering Temperature Range Tsol 260 °C Supply Voltage [Note1] Recommended Operating Conditions (Ta=25℃ ℃) Parameter Symbol Min. Max. Unit Operating Temperature Topr -40 +85 °C Supply Voltage Vcc 1.8 5.5 V Min Max Unit Test Condition 10 16 16 23 uA VCC = 3V Ev = 100Lux 23 30 Rankings Bin Symbol 1 2 Iph 3 Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 3 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Electrical and Optical Characteristics (Ta=25℃ ℃) Parameter Symbol MIN TYP MAX. Unit ID --- 0.05 0.1 uA VCC=3V, Ev= 0Lux IPH1 1 3 --- uA VCC=3V, Ev= 10Lux IPH2 10 30 --- uA VCC=3V, Ev= 100Lux IPH3 100 300 --- uA VCC=3V, Ev= 1000Lux IPH4 100 300 --- uA VCC=3V, Ev= 1000Lux IPH4 / IPH3 --- 1 --- --- VCC=3V, Ev= 1000Lux λp --- 560 --- nm Sensitivity Wavelength Range λ 390 --- 700 nm Rise time tr --- 0.36 --- ms Fall time tf --- 1.13 --- ms 2θ1/2 --- 143 --- Deg. Dark Current Light Current Photocurrent Ratio Peak Sensitivity Wavelength Angle of half Sensitivity Test Condition [Note1] [Note1] [Note1] [Note2] VCC = 3 V RL = 27KΩ VCC = 3 V Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp. Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 4 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Typical Electrical and Optical Characteristics Curves Fig.1 Light Current vs. Illuminance Fig.2 1000 Output Voltage vs. Illuminance ℃ 10 Ta = 25 Vcc = 3V VCC = 3V 1 Output voltage (V) Light current (uA) 100 10 1 0.1 0.01 Fluorence Fluorence Fluorence Fluorence 1E-3 light R L light R L light R L light R L = 1 KΩ = 7.5 KΩ = 27 KΩ = 75 KΩ 0.1 1 10 100 1000 1E-4 Illuminance (Lux) 1 10 100 1000 10000 Illuminance (Lux) Fig.3 Spectral Response Fig.4 Light current vs. Supply Voltage 1000 Light current (uA) EV = 100 Lux 100 10 1 1 2 3 4 5 6 Supply voltage (V) Fig.5 Light Current vs. Temperature Fig.6 Dark Current vs. Temperature 2.0 1.8 Relative light current 1.6 VCC = 3V EV = 100 Lux 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -60 -40 -20 0 20 40 ℃) 60 80 100 Temperature ( Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 5 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Converting Photocurrent to Voltage Note: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: Vout(max.) = Iout(max.) × RL ≦ Vout(saturation)＝Vcc－0.4V Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 6 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Format xxxxxx xxxxxx RoHS xxxxxxxxxxxx xxxx xxxxxxxx Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 7 http:\\www.everlight.com Oct.10, 2008 5mm T-1 3/4 Ambient Light Sensor ALS-PDIC243-3B Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. Everlight Electronics Co., Ltd. Document No: DAS-024-010 Rev1 8 http:\\www.everlight.com Oct.10, 2008