Bicolor Surface Mount Chip LEDs Technical Data HSMF-C655 HSMF-C656 HSMF-C657 Features Applications • Small Size • Diffuse Optics • Compatible with IR Solder Processes • Three Combinations Available: Red/Green, Orange/Green, Yellow/Green • Available in 8 mm Tape on 7” (178 mm) Diameter Reels • Symbol Backlighting • Status Indication • Front Panel Indicator Part Number HSMF-C655 HSMF-C656 HSMF-C657 Description The HSMF-C65x series of bicolor chip-type LEDs are designed in an industry standard package for ease of handling and use. These bicolor LEDs are available as high efficiency red/green, yellow/ green, and orange/green. Color High Efficiency Red/ Green Yellow/ Green Orange/ Green The small size, low 1.1 mm profile and wide viewing angle make these LEDs excellent for backlighting applications and front panel illumination. They are compatible with IR reflow soldering processes. Parts/Reel 3000 3000 3000 2 Package Dimensions GREEN 1 1 3 2 4 3 GREEN CATHODE MARK 2 4 RED/ORANGE/YELLOW POLARITY RED/ORANGE/YELLOW 3.20 (0.126) 2.70 (0.106) 1.10 (0.043) 2.00 (0.079) 0.50 (0.020) 0.50 (0.020) R 0.25 (0.010) 1.40 (0.055) 0.90 (0.035) Notes: 1. Dimensions in mm. 2. Tolerance ± 0.1 mm unless otherwise noted. Absolute Maximum Ratings at TA = 25°C Parameter DC Forward Current[1], [2] Power Dissipation Reverse Voltage (IR = 100 µA) LED Junction Temperature Operating Temperature Range Storage Temperature Range Notes: 1. Derate Linearly as shown in Figure 4. 2. Maximum current is for entire package. HSMF-C65x 25 65 5 95 -25 to +80 -30 to +85 Units mA mW V °C °C °C 3 Optical Characteristics at TA = 25°C Color High Efficiency Red Orange Yellow Green Luminous Intensity IV (mcd) @ IF = 20 mA Min. Typ. 1.6 5.0 1.6 1.6 4.0 4.0 5.0 9.0 Peak Wavelength λpeak (nm) Typ. 639 Color Dominant Wavelength λd[1] (nm) Typ. 626 Viewing Angle 2θ1/2 (degrees)[2] Typ. 155 Luminous Efficacy ηV (lm/W)[3] 145 606 584 570 604 586 572 155 155 155 380 500 595 Notes: 1. The dominant wavelength, λd, is derived from the 1931 CIE chromaticity diagram and represents the perceived color of the device with respect to standard illuminant D65. 2. θ 1/2 is the off-axis angle where the luminous intensity if 1 /2 the peak intensity. 3. The luminous efficacy, ηV , is the ratio of luminous flux to radiant flux, φ V/φe. Electrical Characteristics at TA = 25°C Color High Efficiency Red Orange Yellow Green Forward Voltage VF (Volts) @ I F = 20 mA Typ. Max. 1.9 2.6 2.1 2.6 2.1 2.6 2.2 3.0 Reverse Breakdown VR (Volts) @ IR = 100 µA Min. 5 5 5 5 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 4 4 3 8 Thermal Resistance RθJ-Pin ( °C/W) 325 325 325 325 4 Bin ID A B C D E Green Color Bins [1] Dom. Wavelength (nm) Min. Max. 561.5 564.5 564.5 567.5 567.5 570.5 570.5 573.5 573.5 576.5 Tolerance: ± 0.5 nm. Bin ID A B C D E F Orange Color Bins [1] Dom. Wavelength (nm) Min. Max. 597.0 600.0 600.0 603.0 603.0 606.0 606.0 6090 609.0 612.0 612.0 615.0 Tolerance: ± 1 nm. Bin ID A B C D E F Yellow/Amber Color Bins [1] Dom. Wavelength (nm) Min. Max. 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 594.5 594.5 597.0 Tolerance: ± 0.5 nm. Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins. 5 Luminous Intensity Bin Limits[1] Bin ID Minimum (mcd) Maximum (mcd) A 0.11 0.18 B 0.18 0.29 C 0.29 0.45 D 0.45 0.72 E 0.72 1.10 F 1.10 1.80 G 1.80 2.80 H 2.80 4.50 J 4.50 7.20 K 7.20 11.20 L 11.20 18.00 M 18.00 28.50 N 28.50 45.00 P 45.00 71.50 Q 71.50 112.50 R 112.50 180.00 S 180.00 285.00 T 285.00 450.00 U 450.00 715.00 V 715.00 1125.00 W 1125.00 1800.00 X 1800.00 2850.00 Y 2850.00 4500.00 Tolerance: ± 15%. Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins. 6 RELATIVE INTENSITY 1.0 ORANGE GREEN HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 750 WAVELENGTH – nm Figure 1. Relative Intensity vs. Wavelength. 1.2 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) IF – FORWARD CURRENT – mA 20 YELLOW 15 ORANGE 10 HER GREEN 5 0 1.0 1.5 2.0 2.5 3.0 VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. IF – FORWARD CURRENT – mA 35 30 25 20 15 10 5 0 20 40 60 80 0.8 0.6 0.4 0.2 0 0 5 10 15 20 IDC – DC FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. DC Forward Current. 40 0 1.0 100 TA – AMBIENT TEMPERATURE – °C Figure 4. Maximum DC Current vs. Ambient Temperature. 7 20° 10° 0° 1.0 10 SEC. MAX. .8 40° 50° .6 60° .4 70° .2 80° 230°C MAX. TEMPERATURE NORMALIZED INTENSITY 30° PRE-HEAT 140-160°C 4°C/SEC. MAX. OVER 2 MIN. 4°C/SEC. MAX. TIME 90° 10° 20° 30° 40° 50° 60° 70° 80° 90°100° Figure 6. Recommended Reflow Soldering Profile. ANGLE Figure 5. Intensity vs. Angle. USER FEED DIRECTION 1.0 (0.039) 1.0 (0.039) CATHODE SIDE 0.4 (0.016) 1.5 (0.059) 2.0 (0.079) 1.5 (0.059) PRINTED LABEL Figure 7. Recommended Solder Pattern. Figure 8. Reeling Orientation. 180 Ø (7.08) 21.0 (0.83) 2.0 (0.08) 60.0 Ø (2.36) Ø 13.0 (0.51) LABEL 60° 60° NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES). Figure 9. Reel Dimensions. 11.4 (0.45) 9.0 (0.35) 4.00 ± 0.10 (0.157 ± 0.004) 1.50 + 0.10 0 Ø (0.059 + 0.004) 0 1.30 ± 0.10 (0.051 ± 0.004) CATHODE 0.20 ± 0.05 (0.008 ± 0.002) 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) 3.7 ± 0.1 (0.146 ± 0.004) 8.00 ± 0.30 (0.315 ± 0.012) 3.15 ± 0.1 (0.124 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) USER FEED DIRECTION CARRIER TAPE COVER TAPE 4.00 ± 0.10 (0.157 ± 0.004) Figure 10. Tape Dimensions. END THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. 150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 11. Tape Leader and Trailer Dimensions. www.agilent.com/semiconductors Storage Condition: 5 to 30˚ C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 ± 5˚C for 20 hours. For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-4447EN July 31, 2002 5988-7313EN