battery drive, FTP-608 Series 2” high speed thermal printer FTP-628 MCL701, Vertical Easy Loading Method n Overview The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing on 2-inch wide paper (58mm) where platens are removable. Our original platen removal mechanism improved paper loading and maintenance. The FTP-608 MCL series can be used for a variety of applications, such as portable terminals, POS, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment. n HIGHLIGHTS • Easy loading type Our original platen removal mechanism improved paper loading and maintenance. • Ultra compact Height 18.8 mm, width 67.5 mm, depth 31.5 mm for the 2 inch model. • High speed printing It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu's unique head drive control. • High resolution printing 8 dots/mm of resolution printing is possible. FTP-628MCL701 n Part numbers Item Part Number Printer mechanism FTP-628MCL701 (2-inch wide paper: 58mm) without platen open detect switch LSI for driving TB A Interface Board Parallel TB A Serial TB A Interface Cables Parallel FTP-628Y202 Serial FTP-628Y302 Power cable Head, motor, logic FTP-628Y402 n SPECIFICATIONS Item Specifications Part number FTP-628MCL701 Printing method Thermal-line dot method Dot structure 384 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 48 mm Number of columns ANK 32 columns/line (maximum 12x 24 dot font) Paper width 58 mm+0 -1 Paper thickness 60 to 100 µ m (some paper in this range may not be used because of paper characteristics Printing Speed Maximum 80mm/sec. (640 dot line/sec.) at 8.5V Character types Alphanumeric, katakana: 159 types International and special characters: 195 types JIS Kanji level 1, level 2, non-Kanji (supported only when Kanji CG is mounted): about 6800 types 12 × 24 dots, (1.5 × 3.0mm), 32 columns: ANK Character, dimensions (H×W), number of columns 24 × 24 dots, (3.0 × 3.0mm), 16 columns: ANK, Kanji 8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK 16 × 16 dots, (2.0 × 2.0 mm), 24 columns: ANK, Kanji FTP-628MCL701 n SPECIFICATIONS Item Interface Operating Voltage Dimensions Weight Detection function FTP-628MCL701 Conforms to RS232C / Centronics For print head 4.2 VDC to 8.5 V, average current 0.87A (0.93),peak value Printing ratio: 12.5%, printing speed 50mm/sec. at 7.2 V For motor 4.2 VDC to 8.5 V, 1 A maximum For logic 5 VDC ± 5%, 0.1 A maximum Printer mechanism 67.5 x 31.5 x 18.5 mm (WxDxH) Interface board TBA Printer mechanism Approximately 40g Interface board TBA Pulse resistance: 100 million pulses/dot (under our standard conditions). Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) Head life Operating environment Specification Operating temperature* 0˚ C to +50˚ C Operating humidity 20 to 85% RH (no condensation) Storage temperature -20˚ C to +60˚ C (paper not included) Storage humidity 5 to 95% RH (no condensation) Head temperature detection Detected by thermistor Paper out/mark detection Detected by photo-interrupter Recommended thermal sensitive paper High sensitive paper: TF50KS-E4 (Nippon Paper) Standard paper: TK50KS-E (Nippon Paper) PD150R (Oji Paper) FTP-020P0701 (58mm) TK60KS-F1 (Nippon Paper) FTP-020P0102 (58mm) Medium life storage paper: PD170R (Oji Paper) AFP220VBB-1 (Mitsubishi Paper) Long life storage paper: PD160R-N (Oji Paper) AFP-235 (Mitsubishi Paper) TP50KJ-R (Nippon Paper) HA112AA (Nippon Paper) *+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability) FTP-628MCL701 n FUNCTION Item 1. 8. Mark detection functio n 2. Paper out detectio n 9. MCU operation abnormality detectio n 3. Paper near end detectio n 10 . Power ON/OFF sequence protectio n 4. Test print functio n Ite m Thermal head temperature abnormality detection 5. Blow-out fuse detectio n 6. Head voltage abnormality detectio n 7. Motor power saving functio n 11. Motor over-current protectio n 12 . Hardware time r n dimensions FTP-628MCL701 n Printer connector (flexible PT board) pin arrays FTP-628 MCL701 Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product No Signal I/O Contents — Cathode for photo interruptor 1 PHK 2 VSEN I paper sensor power 3 PHE O Emittor for photo interruptor 4 MT/B I 5 MT/B I 6 MT/A I 7 MT/A I 8 VH — 9 VH — 10 DIN I Data in 11 CLK I Synchronous clock for communication 12 GND — 13 GND — 14 STB6 I 15 STB5 I 16 STB4 I 17 Vdd I Logic power 18 TH O Thermally sensitive resistor input termnial 1 19 TH O Thermally sensitive resistor input termnial 2 20 STB3 I 21 STB2 I 22 STB1 I 23 GND I 24 GND I 25 LAT I Data latch 26 DO O Data out 27 VH I 28 VH I 29 N.C. - 30 N.C. - Stepping motor excitation signal Power supply for thermal head Ground power supply for thermal head Thermal head energizing control signal Thermal head energizing control signal Ground power supply for thermal head Power supply for thermal head Not connected Do not plug or unplug the FPC when power is on. FTP-628MCL701 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. June9/2006