FTP-639USL100-R Series
24V driven receipt, ticket printer
3” KIOSK printer unit
FTP-639USL100-R Series
nOverview
The FTP-639USL Series is 24V driven receipt printer unit with cutter
for 3 inch wide paper. The unit has our high-speed FTP-639MCL
mechanism, cutter and control board, with an integrated paper feed and
built-in paper guide section.
Y
R
A
The receipt printer unit is most suitable for applications such as
Kiosk, ATM, receipt, label, and ticket issuing printers for various other
equipment.
IN
M
I
L
nfeatures
E
R
FTP-639USL100 - horizontal
• External presenter option
• Medium duty unit (mounting is easy)
P
• Ultra high speed printer (125/200mm / sec.)
• Auto cutter included
• Paper near end-detection function
• Up to 6 inch paper roll diameter
FTP-639USL100 - vertical
• Rear paper auto loading
• Paper jam detection
• Prints 2-D barcodes
nDESIGNATION
Item
Printer module interface
Cables
*:
Part Number
USB (ver 2.0)
FTP-639USL101*
Serial (RS-232C) / USB
FTP-639USL102*
USB (ver 2.0)
FTP-639USL201
Serial (RS-232C) / USB
FTP-639USL202
USB interface
FTP-629Y301
Serial interface
FTP-629Y302
Power for logic, head, motor
FTP-629Y603
Comment
without presenter
with presenter
Interface board is FTP-629DSL350 series
1
FTP-639USL100-R Series
nspecifications
Item
Specifications
Part number
FTP-639USL101/102/201/202
Printing methodThermal-sensitive line dot method
Dot structure
576 dots/line
Dot pitch (Horizontal)0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area
72 mm
Paper width
80 -1 mm
+0
Y
R
A
Paper thickness
60 to 100 µm
Paper print length
50 to 250mm
Cutting type
Full or partial
N
I
M
Number of columns
48 columns/line (12×24 dot font)
Maximum printing speed
1600 dotlines/s (200 mm/s)
Page mode
Middle speed mode
80mm/sec. without automatic division
High speed mode
125 mm/sec.without automatic division
Ultra high speed mode 200 mm/sec.without automatic division
I
L
E
R
Alphanumeric KANA: 159, Registered: 94, International: 195, OCR: 103
Character types
JIS KANJI (FTP-629DSL400): approximately 6800
P
Character
composition, dimensions (H×W),
Number
of characters
24 × 12 dots, (3.0 × 1.5 mm), 48 columns
24 × 24 dots, (3.0 × 3.0 mm), 24 columns
16 × 8 dots, (2.0 × 1.0 mm), 72 columns
16 × 16 dots, (2.0 × 2.0 mm), 36 columns
OCR I: 24 × 40, 24 columns
OCR III: 24 × 48, 24 columns
OCR IV: 36×60, 16 columns
Expanded: 24×48, 24 columns
Interface
Serial (RS232C), USB
Power supply
For head
24VDC ± 5%, Voltage
Current : average*1 ( ): Peak 12.5% printing ratio
1.0 (2.0) A (at 200 mm/s printing speed, 1 division)
0.7 (1.0) A (at 125 mm/s printing speed, 2 divisions)
0.6 (1.0) A (at 80 mm/s printing speed, 2 divisions)
0.6 (2.0) A (at 80mm/s printing speed, automatic division)
For print motor
24VDC ± 5%, 1.1 A maximum, 0.9A average
For cutter
24VDC ± 5%, 1.3 A maximum
For logic
5VDC ± 5%, 0.2 A maximum (converted from 24V)
(Continued)
2
FTP-639USL100-R Series
(Continued)
Item
Specifications
Dimensions
120.0(W) × 100.0(D) × 80.0(H) mm
Weight (mechanism, cutter, board, frame)
Approximately 760g without arm, 990g with arm
Mechanism
Expected life
Pulse durability :100 million pulse/dot (using Fujitsu's standard
driving method)
Wear resistance: 100 km (at 12.5% printing ratio)
Cutter
1,000,000 cuts
Platen
5,000 cycles
Operating temperature
–20˚C to +60°C
Environmental
conditions
Operating humidity
10 to 85% RH (no condensation)
Storage temperature
–25˚C to +65°C (excluding paper)
Storage humidity
5 to 90% RH (no condensation)
Head temperature
By thermistor (applied energy control, abnormal temperature detection)
Detection
Paper out/Mark detect
By photointerrupter
Y
R
A
N
I
M
I
L
Platen open
By microswitch
Near end paper By mechanical switch
E
R
For rear insertion use (80 mm width)
Recommended papers
Recommended thermal sensitive paper
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
P
: FTP-030P0701/P0102
: PD150R,PD160R-N,PD170R
: TF50KS-E,TF60KS-E,
TF50KS-E4
: P220VBB-1,AFP-235
Paper diameter
Standard
83mm
Extended
150mm
*1: 24VDC, minimum head resistance.
nFUNCTIONS
Item
Ite m
1.
Test print functio n
9.
2.
Paper fee d
10 . Cutter abnormality detectio n
3.
Paper out detectio n
11 . Mark detectio n
4.
Paper near end detectio n
12 . MCU operation abnormality detectio n
5.
Platen open detectio n
13 . Motor power savin g
6.
Thermal head temperature abnormality detectio n 14 . Power supply disconnection protectio n
7.
Motor temperature detectio n
15. Motor protectio n
8.
Voltage abnormality detectio n
16 . Thermal head protectio n
Internal RAM abnormality detectio n
n INTERFACE , COMMAND, OPTIONs
Please refer to the FTP-629DSL350 series. Interface command options, please see FTP-609 datasheet.
3
FTP-639USL100-R Series
■■
external dimension specifications
1. External Dimension Chart of the Control Board
N
I
M
I
L
E
R
P
Y
R
A
Unit: mm
2.Connector Types of Control Board
No.
Name
Function
Remarks
CN1
Power connector
Connect +24V power supply
-
CN2
RS-232 connector
Connect RS-232 interface
depends on models
CN3
Operation panel connector
Connect to operation panel
-
CN4
USB interface connector
Connect USB interface
depends on models
CN5
Thermal head connector
Connect thermal head
-
CN6
Paper feed motor
Connect paper feed motor
-
CN7
Cutter connector
Connect cutter motor
-
CN8
Near end connector
Connect near end switch or sensor
-
CN9
External sensor connector
Connect external sensor
optional
4
FTP-639USL100-R Series
ndimensions
Modular
printer
without presenter
(1) Paper
diameter
83mm(Horizontal
installation)and standard paper roll
(1) Paper Diameter: 83mm
Horizontal
installation
(1)
Paper diameter
83mm(Horizontal installation)
PRELIMINARY
Y
Y
R
R
A
A
NIN
I
MIM
I
L
L
E
E
R
P PR
120
(2) Paper diameter 83mm(Lower installation)
Lower installation
(2) Paper diameter 83mm(Lower installation)
120
5
FTP-639USL100-R Series
ndimensions
Modular printer without presenter and large paper roll
(3) Paper diameter 150mm(Horizontal installation)
Paper
Diameter:
150mm
(3)(1)
Paper
diameter
150mm(Horizontal
installation)
Horizontal installation
PRELIMINARY
IN
M
I
L
E
R
Y
R
A
120
(4) Paper diameter 150mm(Lower installation)
Lower installation
(4) Paper diameter 150mm(Lower installation)
P
120
6
3/3
FTP-639USL100-R Series
ndimensions
Modular printer with presenter and large paper roll
P
N
I
M
I
L
E
R
Y
R
A
7
FTP-639USL100-R Series
nCOMMANDS
Command
Contents
HT
Moves print position to the next tab.
LFLine feed.
FFFeeds forms (new page).
ESC EM+n
Setting the amount of the feeding at automatic paper feed.
ECS RS
Sets reverse printing.
ESC US
Resets reverse printing.
ESC SP+n
Character spacing setting.
ESC ! + n
Sets print mode.
ESC % + n
External registration character specification/cancellation.
ESC & +y+c1+c2+x+d1to dn External registration character definition.
ESC *+m+n1+n2+d1+dN
Sets bit image mode.
ESC - +n
Undeline setting.
Y
R
A
N
I
M
ESC 2
Sets 1/6 inch line feed length.
ESC 3+n
Sets the line feed length.
ESC ? + n
External registration character deletion.
E
R
I
L
ESC @Printer initialization.
P
ESC A+nSets the space between the line.
ESC C+n
Sets the page length by character line.
ESC D+d1+dN +NUL
Sets the tab position.
ESC J+n
Feeds paper in forward direction and prints.
ESC K+nReverse paper feed.
ESC R+n
Selects international character.
ESC V+n
Right Rotation 90° specification / cancellation
ESC X+m+n
Setting the turning time of the motor excitation.
ESC c+1+n
Sets internal processing.
ESC c+5+n
Panel switch enable/disable setting.
ESC d+n
Printing and n-line feeding.
ESC e+n
Prints and reverse feeds n-lines.
ECS s+n
Sets printing speed.
ECS t+nCharacter code table selection.
ESC {+n
Sets/resets upside down printing.
8
FTP-639USL100-R Series
Commands continued
Command
Contents
ESC DEL+n
FS !+n Kanji printing mode collective specification.
FS & Kanji printing mode specification.
FS - + n
Kanji underline specification/cancellation.
FS *+ m+n1+n2+d1 to dn
High speed collective image printing specified.
FS . Kanji printing mode cancellation.
FS 2+c1+c2+d1 to dn
External character definition.
FS 9+n
Sets the detection functions.
FS C+n
Kanji code system selection.
FS E+n
Correction of impressed energy.
FS S+n+n1+n2
Kanji spacing setting.
FS W+n
Kanji double height adn width printing specification/cancellation. FS r+n*1 Parameter transmission.
GS ! + n
Character size specification.
GS & +m + x + y1 + y2 + d1 to dn Registered bit image definition.
GS' + m + n
Registered bit image printing..
GS (+E+L1+L2+n+d,~dq
RS-232C communication setting*1
P
N
I
M
I
L
E
R
Y
R
A
GS <
Line feeds to the next mark.
GS A+m+n
Sets the line feed length after mark detection.
GS E+nSets print quality.
GS L+n1+n2
Left margin position setting.
GS V+m+n
GS W + n1 + n2
Printing area width setting.
GS a+n
Automatic status transmission setting*1
GS e+n+m
Sets bar code width.
GS h+n
Sets bar code height.
GS k+m+n+ d1 to dnBar code printing.
GS w+n
Sets bar code length.
*1: These commands are valid with FTP-629DSL350 series serial interface.
9
FTP-639USL100-R Series
■■
OPTIONS
1. Cables
Name
Part Number
Cable length
Interface cable (board to
mechanism)
USB
FTP-629Y301
500mm (19.7 inch)
RS-232C
FTP-629Y302
500mm (19.7 inch)
Power supply cable
Logic, head, motor FTP-629Y603
300mm (11. 8inch)
2. Driver LSI of Control Board
Name
MCU
Part Number
FTP-629CU350
Quantity / Tray
84
Remarks
On-board Flash and SRAM
Y
R
A
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
I
L
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://us.fujitsu.com/components/
E
R
P
N
I
M
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2012 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. October 16, 2012.
10