MURS120 Reverse Voltage 200 Volts Features Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diode Ultrafast recovery time for high efficiency For surface mount applications Glass passivated junction High temperature soldering guaranteed: 250oC/10Seconds on terminals Mechanical Data Case: JEDEC DO-214AA (SMB) molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Parameter Symbols MURS120 Units Maximum repetitive peak reverse voltage VRRM 200 Volts Working peak reverse voltage VRWM 200 Volts Maximum DC blocking voltage V DC 200 Volts IF(AV) 1.0 2.0 Amps IFSM 40.0 Amps VF 0.875 0.710 Volts IR 2.0 200 0 uA uA Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A trr 25 nS Maximum reverse recovery time at IF=1.0A, di/dt=50A/us, VR=30V, Irr=10% IRM trr 35 nS Maximum forward recovery time at IF=1.0A, di/dt=100A/us, recovery to 1.0V tf r 25 Maximum average forward rectified current at (See figure 1) TL=155oC TL=145oC Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage (Note 1) o at IF=1.0A, TJ=25 C at IF=1.0A, TJ=150oC Maximum instantaneous reverse current at rated DC blocking voltage (Note 1) TJ=25oC TJ=100oC Typical thermal resistance junction to ambient Operating junction and storage temperature range Notes: 1. Pulse test: tp=300us, duty cycle < 2% RθJA 13 TJ, TSTG -55 to +175 nS o C/W o C Ultrafast Plastic Rectifier Forward Current 1.0 Ampere