FLAT PANEL TYPE MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLY H9500 52 mm Square, Bialkali Photocathode, 12-stage, 16 × 16 Multianode, Small Dead Space, Fast Time Response APPLICATIONS ● Small Animal Imaging ● Compact Gamma Camera ● Scinti-mammography ● 2D Radiation Monitor SPECIFICATIONS GENERAL Parameter Spectral Response Peak Wavelength Photocathode Material Window Dynode Material Thickness Structure Number of Stages Number of Anode Pixels Pixel Size / Pitch at Center Effective Area Dimensional Outline (W × H × D) Packing Density (Effective Area / External Size) Weight Operating Ambient Temperature Storage Temperature Description / Value 300 to 650 420 Bialkali Borosilicate glass 1.5 Metal channel dynode 12 256 (16 × 16 matrix) 2.8 × 2.8 / 3.04 49 × 49 52 × 52 × 33.3 89 177 0 to +50 -15 to +50 Unit nm nm — — mm — — — mm mm mm % g °C °C Value -1100 100 180 Unit V µA µA MAXIMUM RATINGS (Absolute Maximum Values) Parameter Supply Voltage (Between Anode to Cathode) Average Anode Output Current in Total Divider Current at -1100 V Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K. FLAT PANEL TYPE MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLY H9500 CHARACTERISTICS (at 25 °C) Cathode Sensitivity Parameter Luminous A Blue Sensitivity Index (CS 5-58) B Quantum Efficiency at 420 nm Luminous C Anode Sensitivity Gain C Anode Dark Current per Channel D Anode Dark Current in Total D Rise Time F Transit Time G Time Response E Transit Time Spread (FWHM) H Pulse Linearity per Channel (±2 % deviation) Uniformity (Condition Figure 3) Cross-talk Min. 50 8.0 — — 0.5 × 106 — — — — — — — — Typ. 60 9.5 24 90 1.5 × 106 0.05 13 0.8 6 0.4 0.2 1: 5 5 Max. — — — — — — 50 — — — — 1: 8 — Unit µA/lm — % A/lm — nA nA ns ns ns mA — % NOTES A:The light source is a tungsten filament lamp operated at a distribution temperature of 2856 K. Supply voltage is 150 volts between the cathode and all other electrodes connected together as anode. B:The value is cathode output current when a blue filter(corning CS 5-58 polished to 1/2 stock thickness) is interposed between the light source and the tube under the same condition as Note A. C:Measured with the same light source as Note A and with the anode-to-cathode supply voltage and voltage distribution ratio shown in Table 1 below. D:Measured with the same supply voltage and voltage distribution ratio as Note C after 30 minutes storage in darkness. E:Those are test data when a signal from a central channel of 256 anodes is used, while all photocathode are illuminated by pulsed light source. F:The rise time is the time for the output pulse to rise from 10 % to 90 % of the peak amplitude when the whole photocathode is illuminated by a delta function light pulse. G:The electron transit time is the interval between the arrival of delta function light pulse at the entrance window of the tube and the time when the anode output reaches the peak amplitude. In measurement, the whole photocathode is illuminated. H:Also called transit time jitter. This is the fluctuation in electron transit time between individual pulses in the single photoelectron event, and defined as the FWHM of the frequency distribution of electron transit time. Table 1: Voltage Distribution Ratio and Supply Voltage Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 Dy11 Dy12 GR P Distribution Ratio 1 1 1 1 1 1 1 1 1 1 1 1 0.9 0.1 Supply Voltage: -1000 V, K: Cathode, Dy: Dynode, GR: Guard Ring P: Anode Figure 1: Typical Spectral Response TPMHB0695ED 107 TPMHB0696EC 106 10 CATHODE RADIANT SENSITIVITY GAIN 1 QUANTUM EFFICIENCY 105 0.1 104 300 400 500 600 700 103 700 800 800 Figure 3: Anode Uniformity (Example) 35 60 68 76 80 85 78 78 82 82 87 84 83 82 68 44 38 38 30 60 58 53 70 70 68 78 79 71 82 84 82 82 85 85 77 81 84 78 85 87 76 84 84 85 87 89 87 91 91 91 100 93 87 97 87 84 87 84 75 78 72 44 46 45 28 50 63 67 76 81 82 89 91 96 92 89 84 82 69 46 26 50 61 63 70 75 79 84 88 88 89 84 83 83 69 46 29 50 64 66 70 72 72 75 79 84 80 81 80 76 63 44 32 52 63 63 67 70 71 70 73 74 72 70 68 64 53 35 34 62 65 65 66 63 66 67 68 65 62 60 59 55 47 25 52.0 ± 0.3 33 P16 47 52 48 44 45 47 46 45 42 43 40 38 35 31 20 P256 3.22 38 59 68 70 74 79 79 78 83 81 82 77 78 81 68 44 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 23.12 37 57 66 67 68 74 75 77 77 78 79 77 79 76 62 40 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 46.24 35 56 64 68 69 69 69 75 73 74 75 72 72 70 61 40 SEPARATION MARK ON FOCUSING ELECTRODE START MARK P16 34 54 63 64 71 68 69 71 74 75 72 70 75 70 61 41 1100 Figure 4: Anode Matrix and Separation Mark 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 23.12 P1 28 47 56 59 65 65 67 67 72 71 73 72 73 70 60 41 1000 SUPPLY VOLTAGE (V) WAVELENGTH (nm) 23 38 45 48 55 54 55 57 58 61 62 58 58 61 53 37 900 14 × 3.04=42.56 0.01 200 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 TOP VIEW 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 SUPPLY VOLTAGE: -1000 V LIGHT SOURCE: TUNGSTEN LAMP with BLUE FILTER (DC LIGHT) SPOT ILLUMINATION (APERTURE SIZE): 3 mm square on each channel 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 3.22 TPMHB0730EA 3.22 CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 100 Figure 2: Typical Gain Characteristics 14 × 3.04=42.56 EFFECTIVE AREA 3.22 49 TOP VIEW The start mark and the separation marks are put on an electrode plate inside. TPMHB0731EA FLAT PANEL TYPE MULTIANODE PHOTOMULTIPLIER TUBE ASSEMBLY H9500 Figure 5: Dimensional Outline (Unit: mm) CONNECTION FOR SIGNAL CONNECTORS (BOTTOM VIEW) SIG4 GND GND GND GND GND GND GND GND P15 P13 P16 P14 P31 P29 P32 P30 P47 P45 P48 P46 P63 P61 P64 P62 P79 P77 P80 P78 P95 P93 P96 P94 P111 P109 P112 P110 P127 P125 P128 P126 -HV: SHV-P (COAXIAL CABLE, RED) CAP HOUSING (POM) 2.6 MAX. BASE (POM) 52.0 ± 0.3 3.04 × 14=42.56 3.04 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 SIG4 6 SIG3 SIG2 SIG1 PHOTOCATHODE (EFFECTIVE AREA) 49 INSULATING TAPE START MARK 46.24 450 - 0 SEPARATION MARK ON FOCUSING ELECTRODE +20 SOCKET HOUSING (POM) 3.04 8.6 1.5 3.04 × 14=42.56 14.4 ± 0.5 36.4 ± 0.9 TOP VIEW 23.65 8.6 4-SIGNAL CONNECTOR ; QTE-040-03-F-D-A, SAMTEC (0.8 mm PITCH. DOUBLE ROW WITH INTEGRAL GND PLATE) 33.3 ± 0.9 49 SIDE VIEW P143 P144 P159 P160 P175 P176 P191 P192 P207 P208 P223 P224 P239 P240 P255 P256 GND GND GND M3 DEPTH: 4 BOTTOM VIEW 50.8 (MATES WITH QTE-040-03 -F-D-A) 50.8 CABLE ASSEMBLY (SUPPLIED) (MATES WITH QSE-040-01 -F-D-A) DY12 OUTPUT P141 P142 P157 P158 P173 P174 P189 P190 P205 P206 P221 P222 P237 P238 P253 P254 GND GND GND GND SIG3 GND GND GND GND GND GND GND GND P11 P9 P12 P10 P27 P25 P28 P26 P43 P41 P44 P42 P59 P57 P60 P58 P75 P73 P76 P74 P91 P89 P92 P90 P107 P105 P108 P106 P123 P121 P124 P122 SIG2 GND GND GND GND GND GND GND GND P7 P5 P8 P6 P23 P21 P24 P22 P39 P37 P40 P38 P55 P53 P56 P54 P71 P69 P72 P70 P87 P85 P88 P86 P103 P101 P104 P102 P119 P117 P120 P118 SIG1 GND GND GND GND GND GND GND GND P3 P1 P4 P2 P19 P17 P20 P18 P35 P33 P36 P34 P51 P49 P52 P50 P67 P65 P68 P66 P83 P81 P84 P82 P99 P97 P100 P98 P115 P113 P116 P114 P139 P140 P155 P156 P171 P172 P187 P188 P203 P204 P219 P220 P235 P236 P251 P252 GND GND GND GND P135 P136 P151 P152 P167 P168 P183 P184 P199 P200 P215 P216 P231 P232 P247 P248 GND GND GND GND P131 P132 P147 P148 P163 P164 P179 P180 P195 P196 P211 P212 P227 P228 P243 P244 GND GND GND GND P137 P138 P153 P154 P169 P170 P185 P186 P201 P202 P217 P218 P233 P234 P249 P250 GND GND GND GND P133 P134 P149 P150 P165 P166 P181 P182 P197 P198 P213 P214 P229 P230 P245 P246 GND GND GND GND P129 P130 P145 P146 P161 P162 P177 P178 P193 P194 P209 P210 P225 P226 P241 P242 GND GND GND GND METAL PLATE (GND) RIBBONIZED COAXIAL CABLE (50 Ω IMPEDANCE) 14.98 15.72 170 ± 5 6.88 NOTE: 4 SETS OF SOCKET AND CABLE ASSEMBLY WILL BE ATTACHED. (SOCKET: QSE-040-01-F-D-A, SAMTEC / CABLE ASSEMBLY: EQCD-040-06, 00-SEU-TEU-1, SAMTEC) P255 K DY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 DY10 DY11 DY12 GR ...... P256 P15 ...... P16 P2 P242 P1 P241 C7 R20 R7 R8 C1 C2 C3 R19 R9 TRANSISTOR CIRCUIT R21 ANODE OUTPUT (P16) ...... ANODE OUTPUT (P15) ANODE OUTPUT (P2) GND ANODE OUTPUT (P1) -HV SHV-P (COAXIAL CABLE, RED) R1 to R9: 470 kΩ (±5 %, 0.125 W) R16 to R18: 51 Ω (±5 %, 0.125 W) R19: 10 kΩ (±5 %, 0.125 W) R20: 1 MΩ (±5 %, 0.125 W) R21, R22: 4.99 kΩ (±5 %, 0.125 W) C1, C7: 0.01 µF (200 V) C2: 0.022 µF (200 V) C3: 0.033 µF (200 V) C8: 0.0047 µF (2 kV) DIVIDER CURRENT 180 µA at -1100 V DY12 OUTPUT R22 .... ...... ...... 4 × 0.8 mm PITCH HEADER (P/N QTE-040-03-F-D-A, SAMTEC) ANODE OUTPUT (P256) R6 ANODE OUTPUT (P255) C8 R5 ANODE OUTPUT (P242) R4 (P225 to P240) R3 R18 ANODE OUTPUT (P241) R2 R17 (P17 to P32) R1 R16 TPMHA0504EB WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TPMH1287E04 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] OCT. 2006 IP Printed in Japan (500)