HMC199MS8 / 199MS8E v04.0404 DUAL SPDT SWITCH DC - 2.5 GHz Typical Applications Features The HMC199MS8 / 199MS8E is ideal for: RoHS-Compliant Product • Cellular Integrated Dual SPDTs • ISM Basestations Low Insertion Loss: <0.5 dB @ 2.0 GHz • PCS Positive Control: 0/+5V Ultra Small MSOP8 Package: 14.8 mm2 SWITCHES - SMT 8 Functional Diagram General Description The HMC199MS8 & HMC199MS8E are low-cost general purpose dual SPDT GaAs “bypass” switches in 8-lead MSOP packages covering DC to 2.5 GHz. These four-RF- port components integrate two SPDT switches and a through line onto a single IC. The designs provide low insertion loss of less than 0.5 dB while switching passive or active external circuit components in and out of the signal path. Port to port isolations are typically 25 to 30 dB. On-chip circuitry enables positive voltage control operation at very low DC currents with control inputs compatible with CMOS and most TTL logic families. Applications include LNA or filter bypass switching and single bit attenuator switching. The HMC199MS8E is a RoHScompliant product. Electrical Specifications, TA = +25° C, Vctl = 0/+5 Vdc, 50 Ohm System Parameter Min. Typ. Max. Units 0.3 0.5 0.7 0.6 0.8 1.0 dB dB dB Insertion Loss Isolation DC - 2.0 GHz DC - 2.5 GHz 22 17 25 21 dB dB Return Loss (On State, Any Port) DC - 2.0 GHz DC - 2.5 GHz 17 12 20 15 dB dB Input Power for 1 dB Compression 0.5 - 2.0 GHz 19 23 dBm Input Third Order Intercept (Two-tone Input Power = 0 dBm Each Tone) 0.5 - 2.0 GHz 32 36 dBm Switching Characteristics DC - 2.5 GHz 20 40 ns ns tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 8 - 30 Frequency DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC199MS8 / 199MS8E v04.0404 DUAL SPDT SWITCH DC - 2.5 GHz Isolation 0 0 -0.5 -10 -1 -1.5 +25 C +85 C -40 C -2 -2.5 -20 -30 8 -40 RFC1 to RFC2 RFC1 to RF1 RFC2 to RF2 -50 -3 -60 0 0.5 1 1.5 2 2.5 3 0 0.5 1 FREQUENCY (GHz) 1.5 2 FREQUENCY (GHz) Return Loss 0 RETURN LOSS (dB) -5 RFC1 RFC2 RF1 RF2 -10 -15 -20 2.5 3 SWITCHES - SMT ISOLATION (dB) INSERTION LOSS (dB) Insertion Loss -25 -30 -35 -40 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) Note: Isolation between RF1 - RF2 (when RFC1 - RFC2 is in insertion loss state) is 25 dB @ 1 GHz and 17 dB @ 2 GHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 31 HMC199MS8 / 199MS8E v04.0404 DUAL SPDT SWITCH DC - 2.5 GHz Compression vs. Frequency Carrier at 900MHz SWITCHES - SMT 8 Distortion vs. Frequency Carrier at 1900MHz CTL Input Input Power for 0.1 dB Compression Input Power for 1.0 dB Compression Input Power for 0.1 dB Compression Input Power for 1.0 dB Compression (Vdc) (dBm) (dBm) (dBm) (dBm) +5 20 23.5 19 22 Control Input Input Third Order Intercept (dBm) 0 dBm Each Tone (Vdc) 900 MHz 1900 MHz +5 34.5 37.5 Caution: Do not operate continuously at RF power input greater than 1 dB compression and do not “hot switch” power levels greater than +13 dBm (Control = 0/+5Vdc). Truth Table *Control Input Tolerances are +/- 0.5 Vdc Control Input* Control Current (Typical) A (Vdc) B (Vdc) Ia (uA) 0 +5 -65 +5 0 65 Signal Path RFC1 to RFC2 RFC1 to RF1 RFC2 to RF2 65 ON OFF OFF -65 OFF ON ON Ib (uA) DC blocking capacitors are required at ports RFC1, RFC2, RF1, RF2. Choose value for lowest frequency of operation. 8 - 32 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC199MS8 / 199MS8E v04.0404 DUAL SPDT SWITCH DC - 2.5 GHz Absolute Maximum Ratings +24 dBm Control Voltage Range (A & B) -0.5 to +7.5 Vdc Channel Temperature 150 °C Thermal Resistance 172 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A 8 SWITCHES - SMT RF Input Power VCTL = 0/+5V ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC199MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC199MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H199 XXXX [2] H199 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 33 HMC199MS8 / 199MS8E v04.0404 DUAL SPDT SWITCH DC - 2.5 GHz Typical Application Circuit SWITCHES - SMT 8 Notes: 1. Set A/B control to 0/+5V, Vdd = +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd = 5 to 7 Volts applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with Vdd = +7V and A/B set to 0/+7V. 5. For further information refer to “Using the HMC199MS8 as a Low-Cost 1-Bit Attenuator” product note. 8 - 34 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC199MS8 / 199MS8E v04.0404 DUAL SPDT SWITCH DC - 2.5 GHz Eval Board Layout (Top View) *R1 & R2 = 100 Ohm. These optional resistors will provide more RF path to control circuit isolation. SWITCHES - SMT 8 List of Materials for Evaluation PCB 103236 [1] Item Description J1 - J4 PCB Mount SMA RF Connector J5 - J8 DC Pin C1 - C4 Chip Capacitor, 0402 Pkg. Choose value for lowest frequency of operation. 330 pF is provided on PCB. R1 - R2 100 Ohm Resistor, 0402 Pkg. U1 HMC199MS8 / HMC199MS8E Bypass Switch PCB [2] 103234 Evaluation PCB 1.5” x 1.5” The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should have 50 ohm impedance. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 35