ETC EE14-511

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 581-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
14 PIN 3.3V ECL CLOCK OSCILLATOR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
UNITS
Storage Temperature
Supply Voltage
(Vcc)
MINIMUM
NOMINAL
MAXIMUM
UNITS
-40
-
85
°C
-0.5
-
7.0
Vdc
MODEL SPECIFICATIONS:
MODEL EE14-511
NOTE
TABLE 2.0
Center Frequency
Total Frequency Tolerance
(Fo)
13
-25
-
165
25
MHz
ppm
EE14-511, EE14-521,
EE14-531, EE14-541
1
DESCRIPTION
MODEL EE14-521
Center Frequency
Total Frequency Tolerance
(Fo)
13
-50
-
165
50
MHz
ppm
1
13
-100
-
165
100
MHz
ppm
1
13
-20
-
165
20
MHz
ppm
1
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
13
-20
0
-
MHz
ppm
°C
1
-
165
20
70
Vdc
MODEL EE14-531
Center Frequency
Total Frequency Tolerance
(Fo)
MODEL EE14-541
Center Frequency
Total Frequency Tolerance
(Fo)
OPERATING SPECIFICATIONS
TABLE 3.0
PARAMETER
Center Frequency
Total Frequency Tolerance
Operating Temperature Range
(Fo)
Supply Voltage
(Vcc)
3.135
3.3
3.465
Supply Current
(Icc)
-
-
60
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
pS RMS
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
-
-60
-100
-130
-140
1
-
pS RMS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
2.275
45
-
50
-
50
1.68
55
1
Ohms
Vdc
Vdc
%
nS
2
PECL OUTPUT CHARACTERISTICS
(High)
(Low)
(Voh)
(Vol)
Duty Cycle
Rise / Fall Time 20% to 80%
PACKAGE CHARACTERISTICS
Package
PROCESS RECOMMENDATIONS
Solder Reflow
Wash
The Connor-Winfield EE14-5xx
series are fixed frequency
Crystal Controlled Oscillators
(XO) designed for applications
requiring low jitter and a tight
frequency stability. Operating
at 3.3V supply voltage, the
EE14-5xx series provides
LVPECL Differential outputs.
FEATURES
3.3V OPERATION
LOW JITTER <1pS RMS
LVPECL DIFFERENTIAL OUTPUTS
TABLE 4.0
PARAMETER
LOAD
Voltage
CW 0107
EE14-511
125.00M
TABLE 1.0
OVERALL FREQUENCY TOLERANCE:
MODEL EE14-511 ±25ppm
MODEL EE14-521 ±50ppm
MODEL EE14-531 ±100ppm
MODEL EE14-541 ±20ppm
3
TEMPERATURE RANGE: 0 to 70°C
TABLE 5.0
Non-hermetic package consisting of an FR4 substrat e with grounded metal
cover.
TABLE 6.0
The component solder used internal to this device has a m elting point of
221°C. The peak temperature inside the device should be less than or
equal to 220°C for a maximum of 10 seconds
Ultrasonic cleaning is not recommended.
Notes
1) Inclusive of calibration tolerance @ 25°C, frequency vs. temperature, frequency vs. chang e in supply voltage, frequency vs.
load variations, shock and vibration and 10 years aging.
2) Output must be terminated into 50 ohms to V cc – 2V or Thevenin equivalent.
3) Duty Cycle measured at 1.977V
ORDERING INFORMATION
EE14-511 - 125.00 MHz
LVPECL
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
INT
Ec061
PAGE 1
OF
2
REV: 12
DATE:
11/4/02
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 581-5040.
PHONE (630) 851-4722.
www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
.260
(6.60mm)
COMP OUT
Vee (Case Ground)
OUTPUT
Vcc
Dimensional Tolerance:
±.005 (.127mm)
±.02 (.508mm)
Specifications subject to change without notice.
DATA SHEET #:
INT
Ec061
PAGE 2
OF
2
REV: 12
DATE:
11/4/02
aCopyright 2001 Connor-Winfield all rights reserved.