R Primary Lithium Battery Expert Primary lithium batteries ER13150 3.6V 450mAh 3.6V Primary lithium-thionyl chloride (Li-SOCl 2 ) Energy type bobbin cell For low drain / long tetm operating applications requesting superior voltage response in -55 ~+85 environments. Cell size references Alternative models Electrical characteristics (typical values relative to cells stored for one year or less at +30 max.) Nominal capacity (at 0.5 mA +20 2.0V cut off. The capacity restored by the cell varies according to current drain, temperature and cut off). 0.45Ah Open circuit voltage (at +20 ) Nominal voltage 3.66V (at 0.5mA +20 ) 3.6V Pulse capability: Typically up to 20 mA (30 mA/0.1 second pulses, drained every 2 mn at +20 from undischarged cells with 10 A base current, yield voltage readings above 3.0V. The readings may vary according to the pulse characteristics, the temperature, and the cell s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult ABLE) Max. Continuous current Max. Pulse current Storage 10mA 20mA (recommended) (for more severe conditions, consult ABLE) Operating temperature range (Operation above ambient T may lead to reduced capacity and lower voltage readings at the beginning of pulses. Consult ABLE) +30 +86 F max -55 / +85 -76 F / +185 F Physical characteristics Diameter (max) 13mm(0.45 in) Height (max) 15mm(0.6 in) Typical weight 5.5g(0.18oz) Available termination suffix radial tabs, radial pins, axial leads, flying leads Tel:0086 755 29807561/63 Fax:0086 755 29807510 Email:[email protected] website:www.able-battery.com R Primary Lithium Battery Expert Characteristic curves O Discharge performance 3.6V 450mAh C 3.5 V ER13150 25 3.0 4.0 1 0.05 5 0.1 (+) Voltage 3.5 3.0 2.5 2.5 2.0 0 1 2 3 4 5 6 7 8 9 10 ***S* 2.0 10mA 4mA 0.5mA 100 A 0.28Ah 0.35Ah 0.45Ah 0.39 Ah 1.5 1.0 0.1 15.0Max 1 10 2 3 10 4 10 Hours 10 5 10 13.0Max Capacity VS Current 0.5 20 C Storage The storage area should be clean, cool (not exceeding +30 ), dry and ventilated. Warning Do not use if the battery casing was mangled. Please discharge the battery few minutes with 100mA,if the battery voltage is lower than your need or consult ABLE. Don t use different models of battery in series. Soldering the tag should be finished in few seconds. Do not try to recharge. O Capacity 72 C 0.3 O 55 C 0.2 O -30 C O 0C 0.1 0.0 0.01 0.1 Current 1 10 mA 100 Voltage VS Temperature 3.8 3.6 10 A V Main applications Radiocommunication and other military applications Alarms and security systems Beacons and emergency location transmitters GPS Metering systems Sonobuoys LED lighting applications Others 0.4 3.4 0.1mA Voltage Key features High and stable operating voltage Superior drain capability Low self-discharge rate (less than 1% after 1year of storage at +20 ) Optional stainless steel container for low magnetic and nickle plated steel container for more safe design Hermetic glass-to-metal sealing Notch technology for safety vent is recommended Non-flammable electrolyte Ah O 3.2 0.5mA 3.0 2.8 -60 2mA -40 -20 0 20 Temperature 40 60 80 Tel:0086 755 29807561/63 Fax:0086 755 29807510 Email:[email protected] website:www.able-battery.com