ETC SD197-70-74-661

SD 197-70-74-661
Cooled Large Area 10mm Red Silicon APD Module
PACKAGE DIMENSIONS INCH [mm]
FEATURES
DESCRIPTION
APPLICATIONS
• Low noise
• Small size
• High sensitivity
The SD 197-70-72-661 module Incorporates a 10mm
cooled APD, TEC controller, HV supply, and two
stage preamplifier, in a small package
• Industrial
• Medical
ABSOLUTE MAXIMUM RATING* (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
+/- 12 VS
+5 VS
PARAMETER
Voltage Supplies
TSTG
Storage Temperature
TO
Operating Temperature
MIN
MAX
UNITS
+/-11
+/-13
+4.75
+5.25
-40
+70
°C
0
+40
°C
ELECTRIC WIRING TABLE
WIRE COLOR
V
*All specifications apply when APD is at 0°C with a gain of 300 and a load resistance of 50 ohms.
Typical HV divider Ratio and voltage gain is 404.
Recommended load on amplifier output is from 50ohms to 1Mohm.
Devices must be mounted to a heat sink with TEC on.
**To activate the external bias control (blue wire), turn the gain adjust fully counter clockwise and
place a jumper across J1 the external bias select connector. Input voltage on blue wire 0 to 5 volts.
The module must be operated with a heat sink.
Red
ITEM
Green
+12V
GND
Black
Blue**
-12V
External Bias Adjust Input
Orange
HV Monitor
Violet
Temperature Monitor
Gray
Temperature Monitor GND
Yellow
+5V
White
GND for +5V Supply
*ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
CHARACTERISTIC
Is
Current Supply
Vos
lrange
S
NEP
Ro
fcut
Output Offset
Spectral Application Range
Sensitivity
Noise Equivalent Power
Output resistance
High Cutoff Frequency
TEST CONDITIONS
+12V supply
-12V supply
+5V supply
MIN
120
30
0.8
Spot Scan
f = 1MHz, l= 500nm
f = 1MHz, l= 500nm
350
TYP
±1
l= 675 nm
MAX
220
50
1.9
±5
1050
4.8
7 x10-15
11
50
14
UNITS
mA
mV
nm
105V/W
W/ √ Hz
ohms
MHz
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, [email protected]
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, [email protected]
Cooled Large Area 10mm Blue Silicon APD Module
SD 197-70-74-661
Spectral Sensitivity Blue @ Gain 300
Dark Ouput Noise @ Gain 300
30
6
25
1/2
)
5
4
Noise (nV/Hz
3
2
20
15
10
1
5
100
Frequency (MHz)
10
1
0
0.1
1050
950
900
1000
Wavelength (nm)
850
800
750
700
650
600
550
500
450
400
350
0
0.01
S e n s itiv ity (1 0 5 V /W )
7
Mechanical Dimension in inches
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
www.lasercomponents.com
Issue: 08/06 / V1 / HW /api/apd/cooled-laapd-mod/ sd197-70-74-661.pdf
Germany and other countries: LASER COMPONENTS GmbH, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, [email protected]
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: +44 1245 491 499, Fax: +44 1245 491 801, [email protected]
2