T-1 3/4 (5 mm) Precision Optical Performance InGaN Blue and Green LEDs SunPower Series HLMP-CB15 HLMP-CM15 HLMP-CB16 HLMP-CM16 HLMP-CB30 HLMP-CM30 HLMP-CB31 HLMP-CM31 Technical Data Features Description • Smooth, Consistent Spatial Radiation Patterns • Viewing Angles: 15˚ and 30˚ • High Luminous Output • Colors: 472 nm Blue, 526 nm Green • Superior Resistance to Moisture These high intensity blue and green LEDs are based on InGaN material technology. InGaN is the most efficient and cost effective material for LEDs in the blue and green region of the spectrum. The 472 nm typical dominant wavelength for blue and 526 nm typical dominant wavelength for green are well suited to color mixing in full color signs. Benefits • Superior Performance in Outdoor Environments • Wavelengths Suitable for Color Mixing in Full Color (RGB) Signs • Color to Color Consistency of Radiation Patterns (CBxx to CMxx to HLMP-EGxx Red) Enables Sign Color Uniformity at All Angles Applications • • • • Commercial Outdoor Signs Automotive Interior Lights Front Panel Indicators Front Panel Backlighting These LED lamps are untinted, nondiffused, T-1 3/4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles. These lamps are made with an advanced optical grade epoxy, offering superior temperature and moisture resistance in outdoor signal and sign applications. The high maximum LED junction temperature limit of +130˚C enables high temperature operation in bright sunlight conditions. The package epoxy contains both UV-a and UV-b inhibitors to reduce the effects of long term exposure to direct sunlight. These lamps are available in two viewing angle options and two package options to give the designer flexibility with optical design and device mounting. CAUTION: HLMP-CBxx LEDs and -CMxx’s are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. 2 Device Selection Guide Part Number Color Viewing Angle Typical Intensity at 20 mA (mcd) Stand Off HLMP-CB15 Blue 15˚ 1575 No HLMP-CB16 Blue 15˚ 1575 Yes HLMP-CB30 Blue 30˚ 560 No HLMP-CB31 Blue 30˚ 560 Yes HLMP-CM15 Green 15˚ 4700 No HLMP-CM16 Green 15˚ 4700 Yes HLMP-CM30 Green 30˚ 1750 No HLMP-CM31 Green 30˚ 1750 Yes Package Dimensions 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) d 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 2.35 (0.093) MAX. 0.70 (0.028) MAX. 31.60 MIN. (1.244) 31.60 MIN. (1.244) 1.50 ± 0.15 (0.059 ± 0.006) 0.70 (0.028) MAX. CATHODE LEAD CATHODE LEAD 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 1.00 MIN. (0.039) 5.80 ± 0.20 (0.228 ± 0.008) 1.00 MIN. (0.039) CATHODE FLAT CATHODE FLAT HLMP-Cx16 and HLMP-Cx31 HLMP-Cx15 and HLMP-Cx30 Notes: 1. Dimensions in mm. 2. Tolerance ± 0.1 mm unless otherwise noted. HLMP-Cx16 HLMP-Cx31 d = 12.60 ± 0.25 d = 11.96 ± 0.25 (0.496 ± 0.010) (0.471 ± 0.010) Absolute Maximum Ratings at TA = 25˚C Parameter Value Units Current[1] 30 mA Peak Forward Current 100 mA Average Forward Current 30 mA Power Dissipation 120 mW 5 V 130 ˚C Operating Temperature Range –40 to +80 ˚C Storage Temperature Range –40 to +100 ˚C Reverse Voltage (IR = 100 µA) LED Junction Temperature 5.80 ± 0.20 (0.228 ± 0.008) 2.54 ± 0.38 (0.100 ± 0.015) 2.54 ± 0.38 (0.100 ± 0.015) DC Forward 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) Note: 1. Derate linearly as shown in Figure 4 for temperatures above 50˚C. 3 Optical Characteristics at TA = 25˚C Part Number Luminous Intensity Peak IV[1] (mcd) Wavelength at IF = 20 mA λPEAK (nm) Min. Typ. Typ. Color, Dominant Wavelength λd[2] (nm) Typ. Viewing Angle Spectral 2θ1/2 Luminous Halfwidth Degrees[3] Efficacy[4] ∆λ 1/2 (nm) Typ. η V (lm/W) HLMP-CB15/16 765 1575 470 472 35 15 75 HLMP-CB30/31 270 560 470 472 35 30 75 HLMP-CM15/16 1650 4700 524 526 47 15 520 HLMP-CM30/31 765 1750 524 526 47 30 520 Notes: 1. All InGaN LEDs represented here are IEC825 Class 2. See Application Brief 1009 and 1015 for details. 2. The dominant wavelength λd is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 4. Luminous efficacy is the ratio of luminous flux to radiant flux. Electrical Characteristics at TA = 25˚C 3.8 BLUE IF – FORWARD CURRENT – mA RELATIVE INTENSITY 0.9 GREEN 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 400 450 Thermal Resistance RθJ-PIN (˚C/W) 5 43 240 4.0 1.0 0.8 Capacitance C (pF), VF = 0, f = 1 MHz Typ. 500 550 600 650 WAVELENGTH – nm Figure 1. Relative Intensity vs. Wavelength. 700 30 1.4 25 1.2 RELATIVE INTENSITY (NORMALIZED AT 20 mA) Forward Voltage VF (Volts) at IF = 20 mA Typ. Max. Reverse Breakdown VR (Volts) at IR = 100 µA Min. 20 15 10 5 0 2.0 2.4 2.8 3.2 3.6 4.0 VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. Forward Current. 1.0 35 0.9 0.9 30 25 20 15 10 5 0 0.8 0.7 0.6 0.5 0.4 0.3 0.2 20 0 40 60 80 0 -30 100 545 478 1.02 477 1.00 476 540 475 535 474 530 473 GREEN 525 -10 0 10 20 30 Figure 5. Spatial Radiation Pattern – 15˚ Lamps. NORMALIZED INTENSITY 550 -20 ANGULAR DISPLACEMENT – DEGREES Figure 4. Maximum Forward Current vs. Ambient Temperature. 0 20 40 60 80 100 0.98 0.3 0.2 0 -40 -30 -20 -10 0 10 20 30 Figure 6. Spatial Radiation Pattern – 30˚ Lamps. 0.94 K 310 400 0.90 L 400 520 M 520 680 N 680 880 P 880 1150 Q 1150 1500 R 1500 1900 S 1900 2500 T 2500 3200 U 3200 4200 V 4200 5500 W 5500 7200 0.88 40 ANGULAR DISPLACEMENT – DEGREES Max. 471 120 0 20 40 60 80 100 DEGREE C Figure 8. Normalized Iv vs. T (Green). Color Bin Limits (nm at 20 mA) Green nm @ 20 mA Bin ID Min. Max. Bin ID Min. Max. 1 460.0 464.0 3 520.0 525.0 2 464.0 468.0 4 525.0 530.0 3 468.0 472.0 5 530.0 535.0 4 472.0 476.0 6 535.0 540.0 5 476.0 480.0 Tolerance for each bin limit will be ± 2 nm. 0.4 Min. 0.5 nm @ 20 mA 0.5 Bin Name FORWARD CURRENT – mA Blue 0.6 0.96 472 Figure 7. Color vs. Forward Current. 0.7 Intensity Bin Limits (mcd @ 20 mA) BLUE 520 0.8 0.1 0.1 TA – AMBIENT TEMPERATURE – °C DOM. WAVELENGTH – nm NORMALIZED INTENSITY 1.0 NORMALIZED INTENSITY IF – FORWARD CURRENT – mA 40 Tolerance of each minimum and maximum = ± 15%. For product information and a complete list of distributors, please go to our web site. www.agilent.com/semiconductors E-mail: [email protected] Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-2249EN February 13, 2002 5988-5675EN