63 MHz SAW Bandpass Filter 0.4 MHz Bandwidth Part Number SF0063CN02271T Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE Horizontal: 1 MHz/div Vertical (from top): Magnitude Magnitude Phase Linearity 10 1 5 dB/div dB/div deg/div SPECIFICATION Parameter Min Typ Center Frequency (Fc) 1 63.00 Insertion Loss 13.1 3 dB Bandwidth 0.40 Max 15.0 0.45 55 dB Bandwidth 1.56 Phase Linearity (in 3 dB BW) 3.0 Passband Ripple 1.5 Units MHz dB MHz 1.60 MHz deg 2.0 dB Triple Transit Suppression 30 35 dB Feed Through 40 45 dB 50 Spurious Rejection (0.3 – 62.2 MHz) 55 58 Ω dB Spurious Rejection (63.8 – 100 MHz) 55 58 dB Source and Load Impedance Input Power Operating Temperature Range Notes: +10 +15 dBm 25 30 °C 20 1. Any specified bandwidths are referenced to this frequency. Rev X1 20-Apr-05 Page 1 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3 63 MHz SAW Bandpass Filter 0.4 MHz Bandwidth Part Number SF0063CN02271T Integrated Circuit Systems, Inc. PACKAGE OUTLINE Units: mm Pin Configuration: Input: 1 Input Return: 14 Output: 8 Output Return: 7 Ground: 2, 9 MATCHING CIRCUIT Typical component values: (Minimum inductor Q = 40) 1 8 14 7 Ls1 = 330 nH Ls2 = 470 nH Cp2 = 51 pF Notes • • Maximum 2% tolerance matching components shall be used. Tuning values shown are for reference only. Optimum values may change depending upon board layout. ISO 9001 Registered Rev X1 20-Apr-05 Page 2 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3