70 MHz SAW Bandpass Filter 7 MHz bandwidth Part Number SF0070CF51556T Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE Horizontal: 10 MHz/div Vertical (from top): Magnitude Magnitude Phase Linearity Group Delay Deviation 10 1 8 30 dB/div dB/div deg/div ns/div SPECIFICATION Parameter Center Frequency ( Fc) 1 Insertion Loss at Fc 1 dB Bandwidth 2 3 dB Bandwidth 40 dB Bandwidth Passband Ripple 3 Phase Ripple Group Delay Ripple Absolute Delay Rejection ( 20 – 64 MHz) Rejection ( 76 - 105 MHz) Substrate Material Ambient Temperature Notes: Min. 69.9 Typ. Max. 70.0 70.1 20.3 22 6.5 6.8 7 7.3 9.3 9.7 0.3 0.8 2 4 50 60 2.2 50 60 50 60 YZ Lithium Niobate 25 Units. MHz dB MHz MHz MHz dB p-p deg p-p ns p-p us dB dB ºC 1. Average of the lower and upper 3 dB band edge frequencies. 2. Relative to level at Fc. 3. Excludes band edge transitions. 4. A smoothing aperture of 250 kHz may be applied to Group Delay Ripple measurement Rev X1 22-Apr-05 Page 1 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3 70 MHz SAW Bandpass Filter 7 MHz bandwidth Part Number SF0070CF51556T Integrated Circuit Systems, Inc. PACKAGE OUTLINE Units: mm Pin Configuration: Input: 14 Input Return: 1 Output: 8 Output Return: 7 Ground: 2, 9 MATCHING CIRCUIT 14 8 Input 50 Ω Single Ended Output 50 Ω Single Ended 1 7 Note • External matching components are not required. ISO 9001 Registered Rev X1 22-Apr-05 Page 2 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3