XPower PRELIMINARY SPEC Part Number : AA1010QB10ZC BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z PLCC-4 PACKAGE. z SINGLE COLOR. z HIGH LUMINANCE. z HIGH POWER,OPERATING CURRENT @350mA. z SUITABLE FOR ALL SMT ASSEMBLY METHODS. z PACKAGE : 500PCS / REEL. Description z MOISTURE SENSITIVITY LEVEL : LEVEL 4. The LED is encapsulated with a soft silicone material. zPATENT PENDING. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7223 REV NO: V.1 DATE:SEP/01/2007 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1201003300 Applications z traffic signaling. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z portable light source (e.g. bicycle flashlight). z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Application Notes z Pressure or stress can damage the encapsulating material and affect the reliability of the LED. Precaution should be taken to avoid pressure on the LED encapsulating surface. z Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. z Handling Indications Use proper handling techniques to prevent damage to the LED surface. Minimize mechanical stress on the LED surface during processing and handling. Do not touch the emitting surface with sharp objects to avoid scratching or damaging the LED. Figure 1 Figure 2 In general, LEDs should be handled by the sides of the For automated pick-and-place machines, the pickup nozzle package. Handling instruments should not touch the emitting should be larger than the size of the LED reflector area to surface of the LED package. avoid placing excess pressure on the LED surface. SPEC NO: DSAH7223 REV NO: V.1 DATE:SEP/01/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1201003300 Selection Guide Dice Part No. AA1010QB10ZC Lens Type BLUE (InGaAlN) WATER CLEAR luminous Intensity [2] Iv(cd)@ 350mA Viewing Angle [1] Φv (lm) [2] @ 350mA Min. Typ. Min. Typ. 2θ1/2 3.3 4.5 12.5 18 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 1.25 W Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +85 °C IF 350 mA Peak Forward Current [2] IFM 500 mA Thermal resistance [1] Rth 9 °C/W DC Forward Current [1] Notes: 1.Results from mounting on PC board FR4(pad size≥100mm 2 per pad), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25°C Parameter Wavelength at peak emission Dominant Wavelength IF=350mA IF=350mA [Typ.] [Typ.] Spectral bandwidth at 50%ΦREL MAX IF=350mA [Typ.] Symbol Value Unit λpeak 452 nm λ dom [1] 458 nm Δλ 20 nm Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] 2.8 VF [2] Forward Voltage IF=350mA [Max.] 3.2 V 3.6 Temperature coefficient of λpeak IF=350mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.2 nm/ °C Temperature coefficient of λdom IF=350mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.1 nm/ °C Temperature coefficient of VF IF=350mA, -10°C≤ T≤100°C [Typ.] TCV -3.2 mV/ °C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAH7223 REV NO: V.1 DATE:SEP/01/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1201003300 AA1010QB10ZC SPEC NO: DSAH7223 REV NO: V.1 DATE:SEP/01/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1201003300 AA1010QB10ZC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH7223 REV NO: V.1 DATE:SEP/01/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1201003300 PACKING & LABEL SPECIFICATIONS AA1010QB10ZC SPEC NO: DSAH7223 REV NO: V.1 DATE:SEP/01/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1201003300