3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3020ACGCK Green Features Description z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM The Green source color devices are made with InGaAlP on SPACE REQUIRED. GaAs substrate Light Emitting Diode. z SUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4217 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1201002891 Selection Guide Part No. Dice AA3020ACGCK Lens Type Green (InGaAlP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 18 60 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4217 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1201002891 Green AA3020ACGCK SPEC NO: DSAH4217 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1201002891 AA3020ACGCK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4217 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1201002891 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH4217 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu AA3020ACGCK DATE: JUN/27/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1201002891