KINGBRIGHT AA3020AYC

3.0x2.0mm SURFACE MOUNT LED LAMP
Part Number: AA3020AYC
Yellow
Features
Description
z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM
The Yellow source color devices are made with Gallium
SPACE REQUIRED.
Arsenide Phosphide on Gallium Phosphide Yellow Light
z SUITABLE FOR COMPACT OPTOELECTRONIC
Emitting Diode.
APPLICATIONS.
z LOW POWER CONSUMPTION.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH4213
REV NO: V.3
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: JUN/27/2007
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1201002964
Selection Guide
Part No.
Dice
AA3020AYC
Lens Type
Yellow (GaAsP/GaP)
Viewing
Angle [1]
Iv (mcd) [2]
@ 20mA
Min.
Typ.
2θ1/2
4
15
90°
WATER CLEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH4213
REV NO: V.3
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: JUN/27/2007
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1201002964
Yellow
AA3020AYC
SPEC NO: DSAH4213
REV NO: V.3
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: JUN/27/2007
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1201002964
AA3020AYC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH4213
REV NO: V.3
APPROVED: WYNEC
CHECKED: Allen Liu
DATE: JUN/27/2007
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1201002964
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAH4213
REV NO: V.3
APPROVED: WYNEC
CHECKED: Allen Liu
AA3020AYC
DATE: JUN/27/2007
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1201002964