KINGBRIGHT AA3020SGC

3.0x2.0mm SURFACE MOUNT LED LAMP
AA3020SGC
Features
z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM
SPACE REQUIRED.
z SUITABLE FOR COMPACT OPTOELECTRONIC
SUPER BRIGHT GREEN
Description
The Super Bright Green source color devices are
made with Gallium Phosphide Green Light Emitting
Diode.
APPLICATIONS.
z LOW POWER CONSUMPTION.
z PACKAGE : 2000PCS / REEL.
z RoHS COMPLIANT
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAA9195
REV NO: V.5
DATE: MAR/17/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1201000138
Selection Guide
Part No.
Dice
SUPER BRIGHT GREEN (GaP)
AA3020SGC
Iv (mcd)
@ 20mA
Lens Type
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ1/2
7
30
90°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Green
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
565
nm
IF=20mA
Super Bright Green
568
nm
IF=20mA
Spectral Line Half-width
Super Bright Green
30
nm
IF=20mA
C
Capacitance
Super Bright Green
15
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Green
2.2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Green
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
Power dissipation
105
mW
DC Forward Current
25
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA9195
REV NO: V.5
DATE: MAR/17/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1201000138
Super Bright Green
AA3020SGC
SPEC NO: DSAA9195
REV NO: V.5
DATE: MAR/17/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1201000138
AA3020SGC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAA9195
REV NO: V.5
DATE: MAR/17/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1201000138