3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: AA3528PR4S/Z WARM WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features ●SINGLE COLOR. The source color devices are made with InGaN Light ●SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Emitting Diode. Static electricity and surge damage the LEDS. PROCESS. It is recommended to use a wrist band or anti-electrostatic ●AVAILABLE ON TAPE AND REEL. glove when handling the LEDs. ●IDEAL FOR BACKLIGHTING. All devices, equipment and machinery must be electrically ●PACKAGE : 1500PCS / REEL. grounded. ●MOISTURE SENSITIVITY LEVEL : LEVEL 5. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens. SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674 Selection Guide Dice Part No. AA3528PR4S/Z Iv (mcd) [2] @ 20mA Lens Type WARM WHITE (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 380 620 110° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device VF [1] Forward Voltage Warm White IR Reverse Current Warm White Chromaticity Coordinates Warm White X Typ. Max. Units Test Conditions 3.2 3.7 V IF=20mA 10 uA VR = 5V pF VF=0V;f=1MHz 0.41 Y C 0.39 Capacitance Warm White 110 Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Warm White Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674 Warm White AA3528PR4S/Z SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674 AA3528PR4S/Z Warm White CIE 0.50 0.48 0.46 0.44 f2 0.42 d2 0.40 f1 d0 0.38 d1 0.36 f0 d3 0.34 0.32 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54 d0 d1 x 0.361 0.3575 0.3870 0.3942 x 0.3575 0.3545 0.3800 0.3870 y 0.385 0.3612 0.382 0.4068 y 0.3612 0.3408 0.358 0.3820 Reference CCT : 4700~3900K Reference CCT : 4700~3900K d2 d3 x 0.3870 0.4254 0.4350 0.3942 x 0.4254 0.387 0.3800 0.4119 y 0.3820 0.4044 0.4260 0.4068 y 0.4044 0.382 0.358 0.3730 Reference CCT : 3900~3200K Reference CCT : 3900~3200K f0 f1 x 0.435 0.4732 0.4600 0.4254 x 0.46 0.4254 0.4119 0.4440 y 0.426 0.4398 0.4152 0.4044 y 0.4152 0.4044 0.373 0.3847 Reference CCT : Reference CCT : 3200~2700K 3200~2700K f2 x 0.4732 0.46 0.4440 0.4800 0.5165 y 0.4398 0.4152 0.3847 0.3960 0.451 Reference CCT : 2700~2300K SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674 AA3528PR4S/Z Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674 PACKING & LABEL SPECIFICATIONS AA3528PR4S/Z SPEC NO: DSAH4522 REV NO: V.1 DATE: MAY/21/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1201002674