4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP AA4040PGC Features PURE GREEN Description SINGLE COLOR. The Pure Green source color devices are made with SUITABLE FOR ALL SMT ASSEMBLY AND Gallium Phosphide Pure Green Light Emitting Diode. SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1239 REV NO: V.4 DATE:JUN/30/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1201000455 Selection Guide Part No. Dice AA4040PGC Iv (mcd) @ 20 mA Lens Type PURE GREEN (GaP) WATER CLEAR Viewing Angle Min. Typ. θ1/2 2θ 1.6 6 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Pure Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 555 nm IF=20mA Pure Green 555 nm IF=20mA Spectral Line Half-width Pure Green 30 nm IF=20mA C Capacitance Pure Green 45 pF VF=0V;f=1MHz VF Forward Voltage Pure Green 2.25 2.5 V IF=20mA IR Reverse Current Pure Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Pure Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 135 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1239 REV NO: V.4 DATE:JUN/30/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1201000455 Pure Green AA4040PGC SPEC NO: DSAD1239 REV NO: V.4 DATE:JUN/30/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1201000455 AA4040PGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1239 REV NO: V.4 DATE:JUN/30/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1201000455 PACKING & LABEL SPECIFICATIONS AA4040PGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1239 REV NO: V.4 DATE:JUN/30/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1201000455