2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP APKA2810MGCK Features MEGA GREEN Description 2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm THICK- The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. NESS. LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(±0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1133 REV NO: V.3 DATE: JUL/02/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000218 Selection Guide Part No. Dice APKA2810MGCK Iv (mcd) @ 20mA Lens Type MEGA GREEN (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 36 80 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Mega Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 574 nm IF=20mA Mega Green 570 nm IF=20mA Spectral Line Half-width Mega Green 20 nm IF=20mA C Capacitance Mega Green 15 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1133 REV NO: V.3 DATE: JUL/02/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000218 Mega Green APKA2810MGCK SPEC NO: DSAD1133 REV NO: V.3 DATE: JUL/02/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000218 APKA2810MGCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1133 REV NO: V.3 DATE: JUL/02/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000218 PACKING & LABEL SPECIFICATIONS APKA2810MGCK Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1133 REV NO: V.3 DATE: JUL/02/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000218