3.5x2.8 mm SMD CHIP LED LAMP KA-3528SURC HYPER RED Description Features The Hyper Red source color devices are made with SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER DH InGaAlP on GaAs substrate Light Emitting Diode. PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAA7666 REV NO: V.9 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 1 OF 4 Selection Guide Part No. Dice KA-3528SURC Iv (mcd) @ 20mA Lens Type HYPER RED (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 110 230 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 640 nm IF=20mA Hyper Red 628 nm IF=20mA Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 125 mW DC Forward Current 50 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA7666 REV NO: V.9 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 2 OF 4 Hyper Red KA-3528SURC SPEC NO: DSAA7666 REV NO: V.9 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 3 OF 4 KA-3528SURC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA7666 REV NO: V.9 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 4 OF 4