1.6X0.8mm INFRA-RED EMITTING DIODE AP1608F3C Features Description 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. MECHANICALLY AND SPECTRALLY MATCHED TO F3 Made with Gallium Arsenide Infrared Emitting diodes. AP1608 PHOTOTRANSISTOR. WATER CLEAR LENS. PACKAGE: 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAF0109 REV NO: V.1 DATE: FEB/14/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000007 Selection Guide Part No. AP1608F3C Dice Po (mW/sr) @ 20mA Lens Type GaAs Viewing Angle Min. Typ. 2θ θ1/2 0.4 1.2 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Item P/N Symbol Typ. Max. Units Test Conditions Forward Voltage F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR - 10 uA VR=5V Capacitance F3 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 - nm IF=20mA Spectral Bandwidth F3 ∆λ1/2 50 - nm IF=20mA Absolute Maximum Ratings at TA=25°C Parameter Symbol F3 Units Power Dissipation PT 100 mW DC Forward Current IF 50 mA Peak Forward Current[1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Note: 1. 1/100 Duty Cycle, 10µs Pulse Width. SPEC NO: DSAF0109 REV NO: V.1 DATE: FEB/14/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000007 AP1608F3C SPEC NO: DSAF0109 REV NO: V.1 DATE: FEB/14/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000007 AP1608F3C Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAF0109 REV NO: V.1 DATE: FEB/14/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.CHENG ERP: 1203000007