2.0x1.25 mm INFRARED EMITTING DIODE Part Number: APT2012F3C Features Description z 2.0mmx1.25mm SMT LED,0.75mm THICKNESS. F3 Made with Gallium Arsenide Infrared Emitting diodes. z MECHANICALLY AND SPECTRALLY MATCHED TO THE PHOTOTRANSISTOR. z WATER CLEAR LENS. z PACKAGE: 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA9557 REV NO: V.4 DATE: MAY/08/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001799 Selection Guide Part No. APT2012F3C Dice Lens Type F3 (GaAs) Po (mW/sr) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 0.4 1.2 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR 10 uA VR = 5V Capacitance F3 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 nm IF=20mA Spectral Bandwidth F3 Δλ1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Symbol F3 Units Power dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA9557 REV NO: V.4 DATE: MAY/08/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001799 APT2012F3C SPEC NO: DSAA9557 REV NO: V.4 DATE: MAY/08/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001799 APT2012F3C Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA9557 REV NO: V.4 DATE: MAY/08/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001799 PACKING & LABEL SPECIFICATIONS APT2012F3C SPEC NO: DSAA9557 REV NO: V.4 DATE: MAY/08/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001799