3.0X1.5mm INFRA-RED EMITTING DIODE APL3015F3C-F01 Features z3.0mmx1.5mm Description SMT LED, 1.4mm THICKNESS. zMECHANICALLY AND SPECTRALLY MATCHED TO F3 Made with Gallium Arsenide Infrared Emitting diodes. THE PHOTOTRANSISTOR. zWATER CLEAR LENS. zPACKAGE zRoHS : 2000PCS / REEL. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01 Selection Guide Part No. APL3015F3C-F01 Dice Po (mW/sr) @ 20mA Lens Type GaAs Viewing Angle Min. Typ. 2θ1/2 0.4 1.2 70° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Item P/N Symbol Typ. Max. Units Test Conditions Forward Voltage F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR - 10 uA VR=5V Capacitance F3 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 - nm IF=20mA Spectral Bandwidth F3 ∆λ1/2 50 - nm IF=20mA Absolute Maximum Ratings at TA=25°C Parameter Symbol F3 Units Power Dissipation PT 100 mW DC Forward Current IF 50 mA Peak Forward Current[1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Note: 1. 1/100 Duty Cycle, 10us Pulse Width. SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01 APL3015F3C-F01 SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01 APL3015F3C-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage or radiant intensity), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01