1.6x0.8mm INFRA-RED EMITTING DIODE AP1608SF4C Features Description 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. MECHANICALLY AND SPECTRALLY MATCHED TO SF4 Made with Gallium Aluminum Arsenide Infrared Emitting diodes. AP1608 PHOTOTRANSISTOR. W ATER CLEAR LENS. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAA8462 REV NO: V.6 DATE: MAR/14/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000062 Selection Guide Part No. AP1608SF4C Dice Po (mW/sr) @ 20mA Lens Type SF4 (GaAlAs) Viewing Angle Min. Typ. 2θ θ1/2 0.4 1 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR - 10 uA VR=5V Capacitance SF4 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 λP 880 - nm IF=20mA Spectral Bandwidth SF4 ∆λ1/2 50 - nm IF=20mA Absolute Maximum Ratings at TA=25°C Parameter Symbol SF4 Units Power Dissipation PT 100 mW DC Forward Current IF 50 mA Peak Forward Current[1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Note: 1. 1/100 Duty Cycle, 10us Pulse Width. SPEC NO: DSAA8462 REV NO: V.6 DATE: MAR/14/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000062 AP1608SF4C SPEC NO: DSAA8462 REV NO: V.6 DATE: MAR/14/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000062 AP1608SF4C Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage or radiant intensity), the typical accuracy of the sorting process isas follows: 1. Radiant Intensity: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA8462 REV NO: V.6 DATE: MAR/14/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000062