3.0mmx1.5mm SMD CHIP LED LAMP APL3015SF4C-F01 Description Features z3.0mmx1.5mm zLOW SMT LED, 1.4mm THICKNESS. Emitting diodes. POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE zRoHS SF4 Made with Gallium Aluminum Arsenide Infrared : 2000PCS / REEL. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1076 REV NO: V.1 DATE: MAR/15/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001613-01 Selection Guide Part No. APL3015SF4C-F01 Dice Po (mW/sr) @ 20mA Lens Type SF4 (GaAlAs) Viewing Angle Min. Typ. 2θ1/2 0.4 1 70° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR - 10 uA VR=5V Capacitance SF4 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 λP 880 - nm IF=20mA Spectral Bandwidth SF4 ∆λ1/2 50 - nm IF=20mA Absolute Maximum Ratings at TA=25°C Parameter Symbol SF4 Units Power Dissipation PT 100 mW DC Forward Current IF 50 mA Peak Forward Current[1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Note: 1. 1/100 Duty Cycle, 10us Pulse Width. SPEC NO: DSAF1076 REV NO: V.1 DATE: MAR/15/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001613-01 APL3015SF4C-F01 SPEC NO: DSAF1076 REV NO: V.1 DATE: MAR/15/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001613-01 APL3015SF4C-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1076 REV NO: V.1 DATE: MAR/15/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001613-01