3x2.4mm SMD CHIP LED LAMP AP23YC/F-F01 YELLOW Features z3mmx2.4mm SMT LED, 1.05mm THICKNESS. Description zLOW POWER CONSUMPTION. The Yellow source color devices are made with Gallium zWIDE VIEWING ANGLE. Arsenide Phosphide on Gallium Phosphide Yellow Light zIDEAL FOR BACKLIGHT AND INDICATOR. Emitting Diode. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAF1212 REV NO: V.1 DATE: MAR/17/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002782-01 Selection Guide Part No. Dice AP23YC/F-F01 Iv (mcd) @ 20mA Lens Type YELLOW (GaAsP/GaP) Viewing Angle Min. Typ. 2θ1/2 2.6 8 120° WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage -40°C To +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAF1212 REV NO: V.1 DATE: MAR/17/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002782-01 Yellow AP23YC/F-F01 SPEC NO:DSAF1212 REV NO: V.1 DATE: MAR/17/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002782-01 AP23YC/F-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO:DSAF1212 REV NO: V.1 DATE: MAR/17/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002782-01